Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > IIDTool Help

IID tool on two vehicles?
Post Reply  Down to end
Page 1 of 1
florent
 


Member Since: 04 Apr 2009
Location: Bordeaux
Posts: 102

France 2008 Discovery 3 TDV6 HSE Auto Bonatti GreyDiscovery 3
IID tool on two vehicles?

Hi,
Some advice needed...
Well, this isn't very glorious but after buying a 2005 S D3 that needs compressor replacing, I just bought a 2008 HSE D3... that needs probably a gearbox reparation or sthing like that & other bits.
So my intention is to use the V3 iidtool I just bought to repair & reprogram the AMK compressor (had the itachi one previously) on the 2005 & use the IIDtool in // on the 2008 onwards.
Is this possible to do so simutaneously or do I have to wait until reparations on the 2005 is done & then transfer to the 2008 & pay the transfer fee?

thanks.
 Serial Land Lover - (3 Defenders, 8 Range Rovers, 2 Freelanders, 4 D3s... to be continued)  
Post #23829553rd Dec 2024 2:07 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10734

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

I would get the 2005 sorted first.

It will do limited things on the 2008 in the mean time
  
Post #23829573rd Dec 2024 2:15 pm
View user's profile Send private message View poster's gallery Reply with quote
Worms
 


Member Since: 24 Sep 2023
Location: Highlands
Posts: 415

Scotland 2005 Discovery 3 TDV6 Base 7 Seat Auto Zambezi SilverDiscovery 3

Or you can buy an extra license - from memory it is about £80 to add a second vehicle.
 Previously:
2010 FL2 TD4e GS
‘93 Defender 110 200TDi CSW - still got this, non-runner on SORN.
‘87 Defender 90 4 cyl Petrol
‘83 110 CSW V8 - best ever!
Range Rover 2-door V8 (not sure of year - 4-speed box and vacuum diff switch)
Series III SWB Diesel 
 
Post #23829653rd Dec 2024 3:29 pm
View user's profile Send private message View poster's gallery Reply with quote
florent
 


Member Since: 04 Apr 2009
Location: Bordeaux
Posts: 102

France 2008 Discovery 3 TDV6 HSE Auto Bonatti GreyDiscovery 3

ok, thanks mates, I'll see if I'm blocked on the 2008 and begin with the 2005 on which I have to go from a hitachi to amk compressor (that needs reprogramming if I've well understood here https://disco3.co.uk/forum/suspension-comp...533.html).
 Serial Land Lover - (3 Defenders, 8 Range Rovers, 2 Freelanders, 4 D3s... to be continued)  
Post #23829683rd Dec 2024 4:05 pm
View user's profile Send private message View poster's gallery Reply with quote
M3DPO
 


Member Since: 22 Sep 2010
Location: Notts.
Posts: 8243

England 2014 Discovery 4 3.0 SDV6 HSE Lux Auto Corris GreyDiscovery 4

The Iid tool will do a surprisingly amount on an unregistered vehicle in fact just about everything except the CCF.
The AMK compression will run ok on Hitachi software but Hitachi will not run on AMK software, the main difference is AMK operates at a lower pressure. Mine came with AMK comp and Hitachi software from new Shocked
 It can when others can't,
It will when others won't,
It goes where others don't. 
 
Post #23830194th Dec 2024 8:47 am
View user's profile Send private message View poster's gallery Reply with quote
eightfoot
 


Member Since: 12 Apr 2015
Location: sunny essex
Posts: 810

United Kingdom 2005 Discovery 3 TDV6 S Auto Bonatti GreyDiscovery 3

florent wrote:
ok, thanks mates, I'll see if I'm blocked on the 2008 and begin with the 2005 on which I have to go from a hitachi to amk compressor (that needs reprogramming if I've well understood here https://disco3.co.uk/forum/suspension-comp...533.html).


get in touch with pat at gap i have a 2005 d3 and a 2013 d4 i use a non bt early version iid that uses the dash display i have full functionality on both vehicles and i seem to recall i paid £60 for an extra licence for the d4 a few years ago
ive not yet come up against a function that the iid cannot be used on both vehicles
 please excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4 
 
Post #23830224th Dec 2024 9:12 am
View user's profile Send private message View poster's gallery Reply with quote
florent
 


Member Since: 04 Apr 2009
Location: Bordeaux
Posts: 102

France 2008 Discovery 3 TDV6 HSE Auto Bonatti GreyDiscovery 3

Ok great, will do so!
 Serial Land Lover - (3 Defenders, 8 Range Rovers, 2 Freelanders, 4 D3s... to be continued)  
Post #23830314th Dec 2024 1:08 pm
View user's profile Send private message View poster's gallery Reply with quote
florent
 


Member Since: 04 Apr 2009
Location: Bordeaux
Posts: 102

France 2008 Discovery 3 TDV6 HSE Auto Bonatti GreyDiscovery 3

eightfoot wrote:
florent wrote:
ok, thanks mates, I'll see if I'm blocked on the 2008 and begin with the 2005 on which I have to go from a hitachi to amk compressor (that needs reprogramming if I've well understood here https://disco3.co.uk/forum/suspension-comp...533.html).


get in touch with pat at gap i have a 2005 d3 and a 2013 d4 i use a non bt early version iid that uses the dash display i have full functionality on both vehicles and i seem to recall i paid £60 for an extra licence for the d4 a few years ago
ive not yet come up against a function that the iid cannot be used on both vehicles

Sorry for the dumb question, but do you have pat's member id here?
thx!
 Serial Land Lover - (3 Defenders, 8 Range Rovers, 2 Freelanders, 4 D3s... to be continued)  
Post #238367716th Dec 2024 5:02 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site