| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
Locki
Member Since: 18 Mar 2005
Location: Germany
Posts: 38
 
|
Does some body know what to do / to change to be able to see the TMC list, to change the target, .... (so to use the whole Sat Nav system) while I' driving ??
I can't understand what the development people thought when they build up the system. It MUST be possible to change the target while driving on the highway.
... so does some body have some ideas. I tried to enter the system menue but I can see only the parameters and I'm not able to change it.
Tks 
|
 18th Mar 2005 3:28 pm |
|
|
Big Al
Member Since: 20 Jan 2005
Location: Wiltshire UK
Posts: 143
  
|
Dear Locki,
I wish to upset you but you do know that the Sat-Nav is from Siemens VDO. It's either German logic or some Politically Correct mandate that you cant alter any of the settings whilst driving.
There is a posting here somewhere whichby using hidden menus allows you to remove the interlock, so that everythign works, even whilst you are driving. Unfortunately however it doesnt work on mt D3, but others have made it works.
:-_
|
| 18th Mar 2005 3:44 pm |
|
|
Locki
Member Since: 18 Mar 2005
Location: Germany
Posts: 38
|
Dear Big Al,
thanks, I know about the origin of this Nav system. I'm living close by.
I know also about the long press in the upper middle of the monitor, after that to push the left button and enter the "password" 753.
But, in this menue you can SEE only all the parameters, it's very very very interesting, but you (or me  ) are not able to change the settings.
So I'm looking for a way that works.
Bye
|
| 18th Mar 2005 5:50 pm |
|
|
Big Al
Member Since: 20 Jan 2005
Location: Wiltshire UK
Posts: 143
|
Dear Locki,
Sorry for the cheap dig, I too wait to hear of a way to be able to change the values from being read-only to read-write, as safety apart, it would be very useful. As I previously said, I cannot get the hidden menus t do anything other than display the current values either.
|
| 18th Mar 2005 7:59 pm |
|
|
jzk
Member Since: 15 Mar 2005
Location: Chicago
Posts: 99
|
Could you explain the "long press in the upper middle of the monitor" thing?
I couldn't get it to work.
Thanks. LR3 HSE
http://www.pbase.com/jzk/lr3
|
| 18th Mar 2005 8:46 pm |
|
|
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
