DISCO4.COM - View topic - U0132-87 Lost Communication with Ride Level Control Module

Advertise on DISCO4.COM

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Log In

DISCO4.COM > Technical (D3)

U0132-87 Lost Communication with Ride Level Control Module

Page 1 of 1

Hyrdonair

Member Since: 11 Feb 2024
Location: Ontario
Posts: 2

U0132-87 Lost Communication with Ride Level Control Module

This one is coming from the instrument cluster control module.

Any ideas what I should be checking. It is flagged as intermittent and if I clear only come back after shutting off and cranking the engine again. No noticeable issues with anything that can see. Suspension works fine and put a new battery in.

Have noticed it is sitting a bit lower on one side but lowers and raises consistently with no issues. The previous owner did an amk compressor swap. Not sure if it was ever reprogrammed correctly. Just waiting for my mongoose clone cable to arrive so I can double check and reprogram for amk and do height calibration.

Just curious if I should just ignore or keep hunting.

Have a few other unrelated codes (heated seat and a speed control issue - no cruise) but want to address this first.

14th Feb 2024 7:40 pm

Flack

Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6308

2007 Discovery 3 TDV6 XS Auto Stornoway Grey

I would just ignore it, it could be a low battery, the only codes you need to worry about are P codes.

Flack

15th Feb 2024 9:28 am

Page 1 of 1

Jump to:

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Quote Reply

DISCO4.COM is independent and not affiliated to Land Rover.