Member Since: 23 Sep 2007
Location: Adelaide
Posts: 406
Genuine LR items for sale in Perth, WA
I have swapped the genuine LR "A" Bar and LR driving lights (no wiring loom or switch is included ofcourse!) with an ARB winch bar and Light force spotties. Items are excellent condition. (Car has done 32000km, 2006 build)
If anyone is interested in the LR items PM me. I'd prefer to sell to someone in Perth (just easier) ....if you are over East and are prepared to arrange the courier at your end - well, different story!!!
Click image to enlarge
[/url]MY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.
4th Jun 2008 9:53 am
wadarryl
Member Since: 13 Jul 2008
Location: Perth W.A.
Posts: 6
I am interested if you still have it. Price?
Regards.07 TDV6 S Lugano Teal, A Bar, LR Spotties,Cooper Discoverer ATRs, Remap, so far.
BlackPerth was last seen heading north of the Flinders Ranges and hasn't come back yet. You may need to wait until after the school holidays are over (or the beer supply runs out).Jim Dowell - D4 HSE TDi, 12,000 hydraulic winch & hidden winch mount, MTRs, TyreDog, Traxide 2 x aux battery system, fixed air compressor, Dolium roof rack, MitchHitch.
RIP 2005 D3 HSE V8 5 seater gold (stolen and torched)
14th Jul 2008 3:44 am
wadarryl
Member Since: 13 Jul 2008
Location: Perth W.A.
Posts: 6
Lucky blackperth, Thanks for the info 07 TDV6 S Lugano Teal, A Bar, LR Spotties,Cooper Discoverer ATRs, Remap, so far.
14th Jul 2008 6:50 am
StornowaySA
Member Since: 23 Sep 2007
Location: Adelaide
Posts: 406
back again Darryl, you are welcome to take a look - have sent PMMY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.
20th Jul 2008 4:28 am
StornowaySA
Member Since: 23 Sep 2007
Location: Adelaide
Posts: 406
SOLD
Good luck WAdarryl - post a pic in due course! abd try "the Large One" (Nick on this site) for a switch for the spotties.MY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.
26th Jul 2008 7:33 am
Bill Wright
Member Since: 03 Nov 2007
Location: Glorious Devon
Posts: 3254
Darryl
I've got a bukshee switch that is the correct one for the the Land Rover spotlight system. If you want it let me know an address in Perth - it shouldn't cost too much to post from UK. I used non-LR spotlights and used a Carling Off- On -On switch that fits exactly in the space where the LR switch is designed to go. If you are not using the LR harness, this is the way to go. See pic in my gallery for switch position.
You could use a Carling Off - On switch but if you fit secondary spotties on your rack, you can wire into the same switch.
I couldn't find anyone to sell me the harness without buying the full LR spotlight kit.
Bill WrightNever take life too seriously. Nobody gets out alive anyway.
D4 SDV6 SE Tech Kaikoura Stone MY15.
26th Jul 2008 7:50 am
wadarryl
Member Since: 13 Jul 2008
Location: Perth W.A.
Posts: 6
Black Perth,
I fitted the A bar of Saturday afternoon, took some time taking the bumper off (and nearly killed me drilling holes into it). But it's done now and looks great. Thanks for the offer to buy them, I really appreciate it.
All, Bill Wright,
Does anyone have a photo of the dash switch, and info on how to run the wires to it?
Regards,
Darryl.
P.S. Will post photo soon.07 TDV6 S Lugano Teal, A Bar, LR Spotties,Cooper Discoverer ATRs, Remap, so far.
27th Jul 2008 10:55 pm
StornowaySA
Member Since: 23 Sep 2007
Location: Adelaide
Posts: 406
No probs!!
Switch photo here:
http://www.disco3.co.uk/forum/topic21589.h...ght+switchMY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.
28th Jul 2008 12:32 am
Bill Wright
Member Since: 03 Nov 2007
Location: Glorious Devon
Posts: 3254
Have a look in the photo galleries of Wiggs or Gareth. I think one of them had a picture of the LR switch in position. There's a picture of the Carling switch in my gallery. Same position as the LR switch. Wiring harness - I haven't a clue about LR one but if you use a conventional/Carling switch, a basic spotlight wiring diagram will suffice. Someone on here will see you right.
Bill WrightNever take life too seriously. Nobody gets out alive anyway.
D4 SDV6 SE Tech Kaikoura Stone MY15.
28th Jul 2008 12:36 am
disco4x4au
Member Since: 19 Jan 2006
Location: Perth
Posts: 409
wadarryl wrote:
Black Perth,
All, Bill Wright,
Does anyone have a photo of the dash switch, and info on how to run the wires to it?
Regards,
Darryl.
P.S. Will post photo soon.
Darryl,
There's a rubber grommet in the firewall where the clutch linkage goes through in a manual - you can run cables through that. It's accessible from the engine bay near the spare battery compartment box.
Cheers,
Gordonex - 2006 D3 TDV6 SE, silver, with lots of stuff - R.I.P.
ex - 2009 D3 TDV6 SE, silver, had lots of stuff too!
Now - 2010 RRS 3.0 TDV6, rimini red, 18" rims + Cooper LTZ, rear eLocker, Spider tuning box, GOE protection plates and rock sliders, GOE 3way shortened rods.
28th Jul 2008 1:01 am
Bill Wright
Member Since: 03 Nov 2007
Location: Glorious Devon
Posts: 3254
Top tip for penetrating the grommet- get a welding rod (thinnest gauge) make a hook on one end,lay your cables in it from the engine bay flatten the hook and tape it with insulating tape to stop it catching. Poke it through the grommet and pick it up from inside the dash. See post by Gareth for confidence check when removing dash panels.
Bill WrightNever take life too seriously. Nobody gets out alive anyway.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
