Stix
Member Since: 01 Aug 2008
Location: Alfreton, Derbyshire, UK
Posts: 6
  
|
| Will RR Venture Cam/Reverse Cam fit to MY8.5 HSE? |
|
I was in the Stealers this morning about some other stuff and we got talking about stuff as you do (TFC - Nikki says "Hi"  )
I have done my reading on the following links;
http://www.disco3.co.uk/forum/topic9675.ht...d+warranty
http://www.disco3.co.uk/forum/topic22146.h...enture+cam
I have the part numbers for the RR fit of Venture Cam / Reversing Cam and all the bits that go with it. It doesnt look that expensive so was thinking about getting it all. The question is can it be made to work as an uprade? I noted what TFC said previously that enablement "constitutes a 'specification uplift' and LR won't issue a code for this" but can it be enabled with the kit? it that still part of the statement from Landrover?
|
 14th Aug 2008 11:54 am |
|
|
90BHP
Member Since: 18 Oct 2006
Location: Half way along the road on the right
Posts: 3706
 
|
Welcome 
No idea on your question. Somebody "technical" will be with you shortly. "To finish first, one first has to finish ...."
|
| 14th Aug 2008 1:00 pm |
|
|
NoDo$h
Member Since: 02 May 2006
Location: Finding new and exciting ways to milk badgers.
Posts: 19689
|
I noticed that the handbook for my 08.5 SE now has a section on the venture cam, so it would seem LR are open to the idea of this being installed. Haven't got any further than that though.  I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.
|
| 14th Aug 2008 1:48 pm |
|
|
Stix
Member Since: 01 Aug 2008
Location: Alfreton, Derbyshire, UK
Posts: 6
|
NoDo$h wrote:I noticed that the handbook for my 08.5 SE now has a section on the venture cam, so it would seem LR are open to the idea of this being installed. Haven't got any further than that though.
Spotted that as well - but also saw TFC's comment so was looking for one of the resident experts to give a considered opinion...
The RR part numbers are
Camera XVi500210
Dock XVL500090
Front Mount VTX500300
Holder VTX500310
But the Stealer (Hunters, Derby) had no records for D3 parts despite it being in the manual... Maybe The Large One will have some information on the parts...??? 
|
| 14th Aug 2008 2:01 pm |
|
|
