aslostasyou
Member Since: 12 Oct 2008
Location: Tampa, FL
Posts: 26
  
|
| 17" Beadlock wheels - feedback |
|
Good morning all,
Newbie here trying to learn about wheel and tire combo's for LR3's.. We're looking at building a set of custom 17" beadlocks here across the pond. A very simple 17" steel wheel with locks. I understand that one might not want to take an LR3 to an area where the terrain requires beedlocks but, we're building it up as a sort of off-road concept vehicle for SEMA. So - as you know about SEMA, anything goes! 
Can anyone confirm if there are any weird sensors, ABS rings, etc...inside the standard wheels?
Any feedback or suggestions would be greatly appreciated.
Many thanks,
J
|
 12th Oct 2008 1:18 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
  
|
Nothing inside the std wheels. Only option is for TPMS but as you know, that's on the air valve stem.
ABS rings are not on the wheel.  Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 12th Oct 2008 3:18 pm |
|
|
LeighW
D3 Decade
Member Since: 31 Jan 2006
Location: Brisbane, AUS
Posts: 920
|
J, there is nothing inside the standard rims but if you haven't already considered these you might like to look at Staun products (not a recommendation, I have only read about them) here. www.staunproducts.com/ LeighW
The old girl is on her third engine...
* first ran a bearing (design failure in original engine)
* second had a failure of the water outlet on top of the engine (pls check yours)
|
| 13th Oct 2008 1:18 pm |
|
|
