Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Australia & New Zealand

My Disco trip computer is confused!
Post Reply  Down to end
Page 1 of 1
denisb
 


Member Since: 27 Apr 2008
Location: Perth, Western Australia
Posts: 7

Australia 2005 Discovery 3 TDV6 SE Auto Chawton WhiteDiscovery 3
My Disco trip computer is confused!

I normally leave the trip computer in the fuel consumption mode and it happily shows consumption in L/100Km.
However, the other day I clicked it to show 'range' and it shows the range in MILES!!! Similarly, the average speed and trip functions also display in non-metric units.
This is a recent phenomenon...previously all of the functions displayed the metric units.
I have tried the reset...holding the button in etc, but to no avail. Fuel consumption stays in the metric measure; everything else is stubbornly non-metric. Sad

Has anybody else experienced this problem...and if so, is there a simple fix?

I apologise if this has been dealt with before...but I couldn't see anything in my simple search.
My vehicle is a Disco 3, TDV6 SE, 2005 vintage.

Thanks in anticipation of some insights into the mystery of the LR computer!
 "I feel like I'm running out of time!"  
Post #9375891st Jun 2012 9:30 am
View user's profile Send private message View poster's gallery Reply with quote
Neil Pettersen
 


Member Since: 23 Nov 2007
Location: Cutting the grass
Posts: 1254


There was some mention of this happening to someone else a couple of years back.
If memory serves , it required an entire new instrument assem. Soemthing to do with
non-reversible software path . Ask on the UK faults and fixes section .
  
Post #9375991st Jun 2012 9:48 am
View user's profile Send private message View poster's gallery Reply with quote
jdea
 


Member Since: 02 Mar 2008
Location: Tannum Sands QLD
Posts: 176

Australia 2005 Discovery 3 TDV6 Base 7 Seat Auto Stornoway GreyDiscovery 3

This happened to me a while back. Took it back to a dealer and they set it back to l/100 k. I would get all your software updated while you are there.. it hasn't happen since

JD
  
Post #9376651st Jun 2012 11:35 am
View user's profile Send private message View poster's gallery Reply with quote
denisb
 


Member Since: 27 Apr 2008
Location: Perth, Western Australia
Posts: 7

Australia 2005 Discovery 3 TDV6 SE Auto Chawton WhiteDiscovery 3

Thank you both Neil and jdea for your replies.
I don't relish the thought of a new instrument pack, but I will try my repair guy next time it's in for a service and see what he can do.
At the end of the day, it's something I can live with if it can't be fixed cost effectively...but we all like our LR's to function as they should eh?
Thanks again Very Happy
 "I feel like I'm running out of time!"  
Post #9396798th Jun 2012 5:33 am
View user's profile Send private message View poster's gallery Reply with quote
chrisalang
 


Member Since: 26 Jun 2009
Location: Mandurah
Posts: 66

Australia 2005 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

Are you using different keys? My D3 is a UK car and I re set it so the trip was in KM. (the main unit is in Miles). If you open the car with a different key it sets the trip to miles. If I use the key that was used to open the car when it was set to Km it reads in KM. It obviously thinks it is a personal setting like the seat position. Hope this helps.
Chris
  
Post #94160613th Jun 2012 6:08 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site