| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
cmyers_uk
Member Since: 10 Apr 2005
Location: Near Bristol, UK
Posts: 433
 
|
| Drive the parking brake to mounting position without LR Diag |
|
Could anybody explain how to
Using the Land Rover approved diagnostic system, drive the parking brake to the 'mounting position'.
But without the Land Rover approved diagnostic system?
Regards
Chris
|
 29th Jan 2009 3:13 pm |
|
|
phurley
Member Since: 19 Aug 2007
Location: So. NH
Posts: 175
  
|
If you mean placing the EPB in 'service mode':▪ Turn the ignition key to pos II
▪ Apply and hold the footbrake
▪ Apply and hold the EPB switch down (to release)
▪ Turn the ignition key to pos 0 and remove the key
▪ Release the footbrake
▪ Release the EPB switch Note: turning the ignition on releases EPB from 'service mode'.
If you are replacing or adjusting the shoes, or installing new discs, then the bedding-in procedure should be performed as well (Note: bedding-in mode cancels if ignition is turned off or if vehicle goes over 30mph).
To enter bedding-in mode▪ Start the engine
▪ Apply the footbrake 3x in 10 secs and hold on the 3rd time
▪ Apply the EPB switch 4x up then 3x down in 10 secs To perform bedding-in▪ From approx 20mph, apply and hold EPB switch
▪ Release EPB switch and wait 1 minute for cooling
▪ Repeat steps above 10x
If you meant something else, then please ignore above. 
PS - Disabling the EPB circuit while working on it is prudent. Fusible Link 8 in BJB.
Last edited by phurley on 29th Jan 2009 6:04 pm. Edited 2 times in total
|
| 29th Jan 2009 3:47 pm |
|
|
SJR
Member Since: 09 Aug 2006
Location: East Manchester
Posts: 4030
 
|
phurley wrote:
▪ Apply the EPB switch 4x up and 3x down in 10 secs[/list]To perform bedding-in[list]▪ From approx 20mph, apply and hold EPB switch
Does that mean
1. Up, Up, Up, Up, Down, Down, Down
or 2. Up, Down, Up, Down, Up, Down, Up
|
| 29th Jan 2009 4:19 pm |
|
|
BrumLee
Member Since: 07 Mar 2008
Location: West Midlands
Posts: 1360
 
|
SJR wrote:
Does that mean
1. Up, Up, Up, Up, Down, Down, Down
or 2. Up, Down, Up, Down, Up, Down, Up
You forgot the 'shake it all around' and 'do the hokey kokey' 
|
| 29th Jan 2009 4:41 pm |
|
|
cmyers_uk
Member Since: 10 Apr 2005
Location: Near Bristol, UK
Posts: 433
|
Thats exactly what I meant (I think) and thank you very much, adjusting mine this weekend.
Just reading the GTR stuff which obviously assumes Ive got LR diag equipment
"Parking Brake Shoe and Lining Adjustment (70.40.11)
NOTE:
NOTE:
1. Check the parking brake for correct operation.
2.
Using the Land Rover approved diagnostic system, drive the parking brake to the 'mounting position'."
Cheers
Chris
Last edited by cmyers_uk on 29th Jan 2009 5:00 pm. Edited 1 time in total
|
| 29th Jan 2009 4:55 pm |
|
|
Gareth
Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26714
|
UP UP UP UP DOWN DOWN DOWN
|
| 29th Jan 2009 4:59 pm |
|
|
SJR
Member Since: 09 Aug 2006
Location: East Manchester
Posts: 4030
|
PS - Left Leg In or Out 
|
| 29th Jan 2009 5:07 pm |
|
|
phurley
Member Since: 19 Aug 2007
Location: So. NH
Posts: 175
|
cmyers_uk wrote:"Parking Brake Shoe and Lining Adjustment (70.40.11)
NOTE:
NOTE:
1. Check the parking brake for correct operation.
2.
Using the Land Rover approved diagnostic system, drive the parking brake to the 'mounting position'."
The new procedure may in fact be relevant for MY08.5 and MY09 owners. I don't know if the EPB module software has been changed for the newer models. Time for some research...
PS - I edited the op to reflect that it's as Gareth said.
|
| 29th Jan 2009 5:14 pm |
|
|
Gareth
Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26714
|
Can anyone confirm if using the procedure to set mounting position (up up up up down down down etc.  ) Do you get a message in the message center to confirm that it has entered the mounting mode?
I know you do get a message to confirm Bedding her In procedure, I never managed to get one with mounting her.
just thought I'd slip that in before the jokes started 
|
| 29th Jan 2009 5:23 pm |
|
|
CFB
Member Since: 02 Dec 2005
Location: Bradford, West Yorkshire
Posts: 6100
|
Will any of the above prevent it screaming? ie In service mode is it temporarily disabled?
Would like to hush it when I sell it on Saturday  2020 BMW X1 18d XDrive X-Line Auto
|
| 29th Jan 2009 5:30 pm |
|
|
cmyers_uk
Member Since: 10 Apr 2005
Location: Near Bristol, UK
Posts: 433
|
Quote:Can anyone confirm if using the procedure to set mounting position (up up up up down down down etc. ) Do you get a message in the message center to confirm that it has entered the mounting mode?
From what I read you get a red flashing light!
"CAUTION: When the vehicle is in the 'mounting position' a red flashing light will appear on the
instrument cluster. This indicates that the parking brake actuator is in the 'mounting position'. It does not
indicate a vehicle fault."
WARNING! the up down shake it all about is for bedding in not mounting
|
| 29th Jan 2009 6:00 pm |
|
|
phurley
Member Since: 19 Aug 2007
Location: So. NH
Posts: 175
|
I believe that when the 'key out apply inhibit' mode is active ('service mode' - not bedding-in mode), that the instrument cluster confirms by flashing the red park brake indicator. I'll double-check that in a little while.
About the 'disabling of EPB prior to sale', no comment  - except to say the prospective buyer could also be a forum member . Also, updated the op to reflect how the EPB comes out of 'service mode'.
|
| 29th Jan 2009 6:25 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
