Member Since: 03 Oct 2005
Location: The Toon
Posts: 698
Lights for sale on Ebay Item 250334988874
I was thinking of bidding on these lights, what are they like to fit.
The drilling of the bumper really.Arctic Frost Discovery 3 TDV6 SE, Active Rear Diff, Adaptive Head Lights, Tow Pack, Ebony Leather, Roof Rails, Mantec Guard. Tasmod Stainless Sill plates. Grabber AT's. Home made mud flaps. Side Steps back on until the next time.
5th Dec 2008 6:13 pm
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15260
Hhmm!
Might keep my beady eye on these!
Existing lamps knackered after i cleaned the reflective lenses with bleach
... silver is now black!
All because Tong lake decided it wanted to go home with me in my lamps!...... always on the road less travelled 🚧
5th Dec 2008 6:31 pm
POINTYED
Member Since: 22 Mar 2008
Location: BURY,LANCS
Posts: 2758
hi
not good news ron
my car still dirty from tong.determined not to wash it
dunc life is tooooo short.enjoy the moment.dont worry be happy
club BSS
5th Dec 2008 8:54 pm
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15260
dunc, not worth washing your D3 in this weather.
Washed my rear end a few days ago [ooh err missus ].
One trip of 2 miles and it was as dirty as before!!
btw ... still waiting on your upload of pics from Tong.
...... always on the road less travelled 🚧
5th Dec 2008 9:34 pm
POINTYED
Member Since: 22 Mar 2008
Location: BURY,LANCS
Posts: 2758
oops
sorry ron
totally forgot.what a tit work ect
will sort out over weekend
dunc life is tooooo short.enjoy the moment.dont worry be happy
club BSS
5th Dec 2008 9:43 pm
APG
Member Since: 12 Oct 2008
Location: Yorkshire
Posts: 75
Re: Lights for sale on Ebay Item 250334988874
chesters wrote:
I was thinking of bidding on these lights, what are they like to fit.
The drilling of the bumper really.
An utter porcine to do...
I read as far as cut 50mm hole in the bumper then took it to the dealers...
They quoted £175 +VAT...
I was rather pleased as it took them 6 hours to do...!
And you need to enable them in the T4 Testbook to make them work...
Oh and you need the four templates to drill the bumper - unlikely to be included with a used set...
These would only be any good as a swap to be honest as you wont have the rest of the loom / switches / plugs etc.
Sorry...
The instructions are here if you want to scare yourself...
Last edited by APG on 5th Dec 2008 10:27 pm. Edited 3 times in total
5th Dec 2008 10:20 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50975
Or for much reasonableness you could go to TFC 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
5th Dec 2008 10:21 pm
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15260
What's happening on the 13th then DG
...... always on the road less travelled 🚧
5th Dec 2008 10:24 pm
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
Thats what I will be doing DG, head he does a great job fitting and enableing, whilst he is doing that I will have some on the NEW expo done too.....
Is TFC's currency on a beer token ratio , if so whats the exchange rate
5th Dec 2008 10:24 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50975
"Silver Streak II" arrives ron 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
5th Dec 2008 10:25 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50975
Member Since: 18 Apr 2008
Location: away
Posts: 10723
DG, hope you get a better transporter driver than the one on the M42 today. Jack-knifed and 2 FL2's written off by what I saw, a D3 looked a little sorry for itself too
5th Dec 2008 10:28 pm
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15260
Nice name DG
Nice Motor DG
Enjoy ...... always on the road less travelled 🚧
5th Dec 2008 10:28 pm
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
HEARD
5th Dec 2008 10:29 pm
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15260
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum