| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
MV
Member Since: 22 Feb 2006
Location: Moscow
Posts: 12
  
|
| Does any1 have SLIDING LOADSPACE FLOOR installed? |
|
After a week of using my new D3 I found it is rather hard to load/unload things into the trunk. I've been thinking of SLIDING LOADSPACE FLOOR (http://www.landroverusa.com/us/en/Vehicles...torage.htm) but dealer's price is above 1.5 US$ here.
Now I'm rethinking of that one again.
Question to those of you who has it - is it possible to access a compartment with tool kit (I am the owner of 5-doors model, so it is underneath of trunk false-floor) without disassembling this SLIDING LOADSPACE FLOOR?
Thanks in advance, Mike
|
 4th Mar 2006 3:22 pm |
|
|
Antoon Stofmeel
Member Since: 30 Jul 2005
Location: Karlsfeld
Posts: 2
|
I am using the slide floor. Takes one hour to install, but you have to remove the plate to get into the underlying compartment. 
Antoon
|
| 4th Mar 2006 5:03 pm |
|
|
MV
Member Since: 22 Feb 2006
Location: Moscow
Posts: 12
|
Thanks, frustrating news... 
Do you have, by a chance, some picture of how it looks installed?
I saw just one (I provided a link in original post)...
|
| 5th Mar 2006 4:37 pm |
|
|
tsultana
Member Since: 24 Oct 2005
Location: Norfolk and Leics
Posts: 32
|
I have one fitted but find that everything falls off it as you slide it in. If things are not placed correctly they hit the wheel arches and dislodge. Is stored in garage as a concequence!!
|
| 7th Mar 2006 11:25 am |
|
|
MV
Member Since: 22 Feb 2006
Location: Moscow
Posts: 12
|
Well, I've ordered one anyway...
Will see how it fits into my needs.
|
| 12th Mar 2006 7:06 pm |
|
|
Dave Jackson
Member Since: 20 Oct 2005
Location: Wallasey
Posts: 20
|
Hi
The only people I know who such a great piece of kit are LR Assistance, LR had it made specially for them.
I have seen it on the 4 occasions LRA have attended due to my system engine fault, it is fitted to their D3 vehs.
Hope this help someway
Dave J
|
| 12th Mar 2006 7:10 pm |
|
|
MV
Member Since: 22 Feb 2006
Location: Moscow
Posts: 12
|
Installed it myself today, about 20 minutes work, plain and simple.
I should admit that sliding floor is real great for cargo transportation. That sounds a bit pathetic but it fits very well into my needs 
I should acknowledge that it blocks an easy access to spare wheel and tools compartment, but it is still accessible by removing sliding floor itself (you need like 60 seconds to do that).
The easiest way out (and I will follow that one) is to order tools bag for 7-sits model and put it into the compartment at right fender. Local cost is about 95 US$...
I'll take a few picture as soon as springs comes here 
|
| 1st Apr 2006 2:12 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
