Member Since: 13 Sep 2008
Location: Midlothian
Posts: 920
Rigid Industries LED lights on D3 /D4
Hi All
I thought you guys might want to see some Rigid Industries LED lights installed on our D3
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
cheers
Click image to enlarge
7th Jun 2012 6:14 pm
pa28pilot
Member Since: 08 Mar 2009
Location: Lancashire
Posts: 204
Rigid Industrial lights
Really like the spots on the bumper. Where did you pick them up from, how much did it cost and fitting instructions.
Cheers Don't be blinkered vision, see the world in colour.
7th Jun 2012 6:52 pm
sarumlight
Member Since: 06 Nov 2008
Location: Off the Plain
Posts: 1592
Thinking about mounting these on the A-bar to replace the Land Rover ones. Curious if you fitted them to the Bracket for the Land Rover spotlights as that's what I'd want to do, but upside-down!
7th Jun 2012 7:46 pm
MikeS2005
Member Since: 13 Sep 2008
Location: Midlothian
Posts: 920
Rigid LED
Hi all
Iam the Official UK importer for Rigid Industries and we put the lights on for customers to see
I only put the DS2s on the front at 4.00pm today these are the combination version and boy are they bright.
I had the LR OE ones on but had them converted to HID but the beam pattern just wasnt right.
You used to be able to use the OE LR connectors as they were originally AMP plugs but Rigid has changed the plugs to the new grey German Plug.
If you want to use the LR OE Loom I stripped the wiring at the plugs and soldered in the Rigid plugs from the included rigid loom that way you can unplug them easily and it looks a factory install.
If you have a set of LR spotlights you can use the OE spotlight mounts they are a straight fit with a little bit of patience.
The D2S are £300.16 +p&p
cheers
7th Jun 2012 9:40 pm
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
Mike
They look good hope it's going wel with the importing
Geoff
8th Jun 2012 2:25 am
Donald
Member Since: 15 May 2007
Location: Inverness
Posts: 188
Mike, what sort of range do they give? any night time pictures to compare to full beam in terms of reach and spread?
If I remember correctly Rigid do a little 8" ish light bar? how does that perform as a driving light?
Member Since: 13 Sep 2008
Location: Midlothian
Posts: 920
rigid led lights
Hi Donald
if you pm me an email address I will send you a pdf on the specs what model/s are you interested in
The D2s wide beam range is 298 metres and the D2s driving is 270 metres length width of the beam is 30 metres
The 6 inch SR units range is depending on model from 308 to 498 metres in length width of the beam is 60 metres
I will be coming up to inverness either at the end of this month or next month just waiting to confirm this to do some work for the fire Brigade and will have my D3 with some demo units on as per the photos if you want to see how good they really are.
cheers
9th Jun 2012 5:24 pm
AJS4X4
Member Since: 30 Mar 2008
Location: Surrey
Posts: 3224
Mike supplied my LED lights for my Can-Am Commander for the Tuareg Rally this year, fantastic lights.
20th Jun 2012 11:06 am
Morgis
Member Since: 18 Feb 2012
Location: Kristiansand
Posts: 274
would like to see LED-spotstripe in the lower grille with the license plate - My 2006 D3 HSE PP
25th Jun 2012 10:51 pm
MikeS2005
Member Since: 13 Sep 2008
Location: Midlothian
Posts: 920
6 inch SR series
Hi Morgis
If you look in my gallery Im sure there is a picture of a set of 6 inch SR series in a similar postion on a Range Rover
That will give you an idea of what it looks like
cheers
26th Jun 2012 9:38 pm
MARKW
Member Since: 29 Aug 2008
Location: SW
Posts: 2390
I like the output of the lights mounted on the bumper but not sure how they would look mounted on an A bar. I reckong they would look a little out of place. I know the light output is great but the aesthetics of them put me off. I know that sounds strange but we all have a big butch manly car and then it looks like you have 2 small undersize lights on the front.
To alay my fears, does anyone have any fitted on an A bar?HONI SOIT QUI MAL Y PENSE
They shall not grow old as those of us left grow old. Age shall not weary them, nor the years condem. At the going down of the sun, and in the morning WE WILL REMEMBER THEM
12th Sep 2012 2:48 pm
Baben
Member Since: 15 Feb 2006
Location: Kyalami
Posts: 2059
I borrowed one of these from a local supplier "Summit" this past weekend. I reckon it looks awesome!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
