GraemeS
Member Since: 17 Mar 2008
Location: NSW
Posts: 706
  
|
| 3.0 RF height sensor wiring harness caution |
|
I found the wiring harness for the right front sensor where it goes over and is attached to the chassis rail was hard against the sharp edge of a bracket that appears to be attached to a heat shield for the RH turbo. Bending-up of the lower edge of the bracket gave good clearance and a rounded edge to the harness. Maybe the bracket on mine is not exactly where its supposed to be so it may not be a common situation.
|
 27th Dec 2009 10:58 am |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
 
|
Any pictures ?
Pete
|
| 27th Dec 2009 11:12 am |
|
|
GraemeS
Member Since: 17 Mar 2008
Location: NSW
Posts: 706
|
No pictures but the harness is quite visible looking into the gap between the top of the tyre and the mudguard. I spotted it just on dark when poking around with a little torch. Its just forward of the sensor link rod.
|
| 27th Dec 2009 11:21 am |
|
|
