BUDD05
Member Since: 12 Feb 2010
Location: Perth, Australia
Posts: 19
 
|
Hi all,
Just wondering how hard it is to put the 3rd row seats back in after having black widow drawers in?
Haven't tried it yet just asking at the moment.
Any help is appreciated.
Regards
Tim 2006 D3 HSE
|
 11th Mar 2010 3:41 am |
|
|
PCH
Member Since: 12 Jan 2005
Location: Anywhere but work
Posts: 812
  
|
I'm assuming that you didn't remove them yourself when the drawers were installed. Hopefully you have the bolts handy as well.
If the seats are still connected then a second person to help lift and guide them back in through the back will make it easier than struggling with an awkard weighty item on your own.
You need a Torx tip on a socket wrench to do the bolts back up and that is about the only special tool I remember.
Chris 2011 Discovery 4 (MY12) SDV6 HSE with General Grabber AT's, Traxide Aux Battery system, custom rear drawers and Autosafe half height cargo barrier
Gone - 2005 Discovery 3 TDV6 HSE
ARB Bull Bar, Warn 9.5XP Winch, IPF D/Lights, Cooper STT's, LR Raised Air Intake, Traxide aux battery system, custom drawers and half height Autosafe cargo barrier, Mitchell Bros 4x4 tow hitch
|
| 11th Mar 2010 11:12 am |
|
|
BUDD05
Member Since: 12 Feb 2010
Location: Perth, Australia
Posts: 19
|
Your right Chris, i didn't remove the seats myself. The seats are still connected, and i think the bolts were used for the drawers.
Thanks for the reply will attempt it this weekend.
Tim 2006 D3 HSE
|
| 11th Mar 2010 11:31 am |
|
|
Peterall
Member Since: 15 Aug 2008
Location: Adelaide
Posts: 15
|
Hi Tim,
How did you go putting the 3rd row seats back? I have BW drawers fitted but will have to put the seats back sometime. I did the BW installation myself so don't feel too fazed by the task. 2005 SE TDV6, BAS remap; Black Widow drawer system; GME 3440 UHF; TPMS; Traxide dual battery controller; Cooper AT3's ; Mitchell Bros tow hitch;
|
| 23rd Mar 2010 1:40 am |
|
|
