| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
YgorOrionBosch
Member Since: 10 Oct 2024
Location: Florianópolis
Posts: 2
|
Hello All;
I have a Disco 3 L319 2008 in my garage with a suspension fault.
Yellow light on dash and C1A1364 code on scanner - "Pressure does not decrease when venting galery".
We change a many parts of suspension, including two front air suspension spring, all 3 block valves, change compressor in 3 times, including a new compressor from china, every model Hitachi (the original).
We clear all the system 2 times, we test all of wiring, and it's OK.
But we can't solve this problem, a big problem, and i dont know what do.
somebody can help me?
Thanks people, i'm from south Brazil.
|
 10th Oct 2024 9:53 am |
|
|
loanrangie
Member Since: 18 Jun 2017
Location: Melbourne
Posts: 699
  
|
Chinese compressors are mostly junk , were the other parts changed because it was needed or just because of this fault ?
|
| 11th Oct 2024 2:51 am |
|
|
ekwan
Member Since: 24 Apr 2016
Location: P Jaya
Posts: 35
  
|
Very likely either the central valve block is faulty or the exhaust valve on the compressor is kaput.
|
| 11th Oct 2024 7:45 am |
|
|
Flapper
Member Since: 04 Feb 2015
Location: Gloucester
Posts: 352
 
|
Check the wiring under the expansion tank for broken or chafed wires a friend did all of the above only to find a wire broken. Fixed the wire all sorted
|
| 15th Oct 2024 6:38 am |
|
|
YgorOrionBosch
Member Since: 10 Oct 2024
Location: Florianópolis
Posts: 2
|
Hello guys.
Yesterday I replaced the original Hitachi compressor with an AMK, and the problem was SOLVED!
8 months of work, 6 Hitachi compressors (2 used, 2 repaired and 2 new Chinese), and simply assembling an AMK solved everything, not even programming was necessary.
HITACHI never again!
Thanks for your help colleagues.
|
| 16th Oct 2024 11:43 pm |
|
|
Captain Crosscheck
Member Since: 03 Sep 2021
Location: Oslo
Posts: 340
|
Could be the software was set up for AMK. AFAIK they require different settings, AMK vs. Hitachi.
|
| 17th Oct 2024 10:36 am |
|
|
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8225
  
|
Hitachi will not run on AMK software but AMK will run on Hitachi software although at a higher pressure, for max life check you have AMK software installed. It can when others can't,
It will when others won't,
It goes where others don't.
|
| 17th Oct 2024 1:43 pm |
|
|
loanrangie
Member Since: 18 Jun 2017
Location: Melbourne
Posts: 699
|
YgorOrionBosch wrote:Hello guys.
Yesterday I replaced the original Hitachi compressor with an AMK, and the problem was SOLVED!
8 months of work, 6 Hitachi compressors (2 used, 2 repaired and 2 new Chinese), and simply assembling an AMK solved everything, not even programming was necessary.
HITACHI never again!
Thanks for your help colleagues.
I dont know what you did to those hitachi's, i'm still on the original with just a service kit put in 2 years ago.
|
| 18th Oct 2024 2:32 am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
