| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
Daz-4x4
Member Since: 18 Mar 2017
Location: SWINDON
Posts: 1
  
|
| Tdv6 starts then shut down after a few seconds. PLEASE HELP |
|
Hi I have a problem with my Discovery 3 2005 Tdv6 auto and been sitting for a few months now, the battery was drained flat by leaving the ignition lefted on for a few hours. Put a new one in and I'm having faults, system voltage low, DC/DC converter fault and control box fan circuit. The glow plug come on five times and the temp gauge flicks with the glow light. It's starts for 5 seconds and shut down. No one here on St Helena Island can fixes this problem, so it will be grateful if I can get some expert help. Thanks
|
 3rd Oct 2017 5:39 pm |
|
|
nige73
Member Since: 01 Dec 2017
Location: South Yorkshire
Posts: 20
|
Did you get to the bottom of this problem I have the identical problem caused with a discharged battery ?.
|
| 27th Feb 2019 7:37 pm |
|
|
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 873
|
You’ve fitted a new battery ?
What about a hard reset?
Have you access to diagnostics to clear codes? Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
|
| 27th Feb 2019 10:09 pm |
|
|
nige73
Member Since: 01 Dec 2017
Location: South Yorkshire
Posts: 20
|
Hi Daz thanks for your reply.The battery is approx a year old and fully charged,it turns the engine over very quickly and is much better than the old battery which still did not have these problems.It happened after the battery went flat after not being used for a few weeks.I have a hawkeye code reader to clear the dtc's but have not done a hard reset.I did find water on the bulkhead below the control box's behind the battery.After dropping down the cover on the transfer case module the one with the 3 plugs I found corrosion and furring on two of the plugs.After a through clean the problem is the same.
|
| 27th Feb 2019 10:52 pm |
|
|
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 873
|
Sounds like you’ve found the issue being water, I’d move the battery out and check all connections behind the battery. Wd40 to drive the water out Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
|
| 28th Feb 2019 8:25 am |
|
|
nige73
Member Since: 01 Dec 2017
Location: South Yorkshire
Posts: 20
|
After doing some more research a Land rover specialist on its website is saying they are seeing the exact symptoms more frequently.They are pointing to the Integrated transfer case module having either failed or needs an update to its programme.This is the unit on mine which had the corrosion on the contacts.
|
| 28th Feb 2019 9:25 pm |
|
|
OutlawLR3
Member Since: 12 Sep 2019
Location: Bremen
Posts: 8
 
|
Hey friend, mine does the really exact same thing. Did you get it running again? Mine is a 2004 TDV6.
Thank you!
|
| 7th Feb 2020 8:30 am |
|
|
roverchippy
Member Since: 03 Jan 2022
Location: Chipping Norton
Posts: 5
 
|
For future reference for people who search.
I had the same thing on my mates disco 3 after battery went flat.
Glow light flashes 5 times. You can hear a clicking noise from the transmission every time the glow plug light comes on. Starts and dies.
Faulty engine ECU. Had to replace it. Decided to go for a ECU kit off eBay. Needed engine ECU, instrument cluster and BCU. Then coded the rest of the modules up to the replacement vin using SDD
|
| 14th Jan 2023 10:53 pm |
|
|
DISCO3FRANS
Member Since: 14 Jun 2023
Location: Vanderbijlpark
Posts: 1
|
Good morning from South Africa. Same problem. Was the problem resolved? Replacing any parts. Please elaborate im stuck without my car.
|
| 14th Jun 2023 5:31 am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
