Member Since: 17 May 2009
Location: Bury
Posts: 2088
Air suspension pump aluminium bracket?
Hi Guys hoping you could help.
Without laughing at me, i've managed to jack the car up on the nearside in the wrong place and a small piece of aluminum bracket has fell out. Now when the air suspension pump is working it vibrates and makes a noise although it is operating fine. I am assuming it is mounted inside the palstic box under the vehicle just before the back wheel? Does anyone know if the pump is mounted on an aluminum bracket and if it can be bought seperately if so? I have not removed the black box as of yet but since the noise has started since the crunch of the jack I thought I would ask the more experienced members.
Thanks guys, Keith
P.S. I know im a plonka!D4 HSE Lux MY16 Club Waitomo
D3 HSE MY06 missing her still…
9th Sep 2010 5:15 pm
roveribis
Member Since: 04 Apr 2009
Location: Puerto Rico
Posts: 132
Yeap, aluminum bracket. Should be able to get it from LR. Now I think there was some 3rd party making a replacement bracket that lifted the pump higher in the frame and protecting it more. It might be a good time to do this....-------------------
2008 LR3
ARB bumper, winch, sealed Snorkle, dual battery, Rover Specialties sliders, whole car custom skid plates, 33" tires, ARB air compressor, CB radio, etc...
9th Sep 2010 7:27 pm
The Transformer
Member Since: 22 Jan 2010
Location: Leicestershire
Posts: 1791
just get it welded up and it will be okHome of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication [email protected] D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"
9th Sep 2010 7:42 pm
Ceekay
Member Since: 17 May 2009
Location: Bury
Posts: 2088
Ali bracket
Thanks guys much appreciated.
Who is tlo though?D4 HSE Lux MY16 Club Waitomo
D3 HSE MY06 missing her still…
9th Sep 2010 8:32 pm
The Transformer
Member Since: 22 Jan 2010
Location: Leicestershire
Posts: 1791
Member Since: 04 Apr 2009
Location: Puerto Rico
Posts: 132
Yeah! Weld.....
I just got a welding machine, and I'm learning.... It's FUN.
I'm making the gas tank skid and other misc. skids for my D3....-------------------
2008 LR3
ARB bumper, winch, sealed Snorkle, dual battery, Rover Specialties sliders, whole car custom skid plates, 33" tires, ARB air compressor, CB radio, etc...
9th Sep 2010 8:42 pm
mouse470
Member Since: 26 Aug 2009
Location: berkshire
Posts: 20
Check pm, just so happens I have one still in it's bag somewhere........
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum