Member Since: 28 Aug 2010
Location: Essex....just
Posts: 160
Playing with AutoLogic
Ever wish you hadnt started something???
Not wishing to upset any of the site supporters or anything, but I was able to have play with Autologic today on my 05 SE. 26 Faults logged on the system . Cleared all these and was just left with B1B02 - 28 and B1C57-14 both from the BCM not sure how significant they are ( Starts and Runs no probs with no fault shown on dash)
But (as always!!) I activated a couple of options that I considered "safe" , follow me home reverse lights and 3 flash indicators and 3 questions now arise.
1) How do you now get the follow home reverse light function to work?
2) Still dont have 3 flash indicators!
2) Once you have activated the functions in the "vehicle Configuration" section do you now have to copy the info to the 3 modules that it gives you IPC, PCM and one other that I have forgotton? I didnt do this because of screen warning that old data will be over writtern and not being 100% sure pressed back - back - back!!!!
Once I had done this it stores the new options to the modules and goes through its auto vehicle shutdown sequence all fine but It then lost HDC and Terrain response programs. Clearing the faults again didnt bring it back and the only way we got them back was to clear the faults again with a Snap On Modis.
As I say Im no expert with D3 diagnostics ( mastered the 'ol td5 though!)
Would anyone care to share the knowledge as to the correct sequence i should have used? or is a case of RTFM!!!
25th Sep 2010 8:46 pm
PaulP
Member Since: 04 May 2007
Location: Barcelona
Posts: 4317
I've never used Autologic, but I can tell you a bit about the first two questions:
1. Once reverse follow-me-home lights have been activated, they can be used (assuming you have the keyfob 3rd button programmed to activate the lights), by pressing the LR logo (i.e. 3rd button) a second time.
The first button press turns on the front lights, the second turns on the reverse lights, and the third press turns them all off.
2. Although the 3 flash indicator is shown in the CCF of all D3s, the software to allow it to function was only available from MY07. In order to get earlier models to work, you would need to update the BCU software to a MY07 version, otherwise it will not work.
I thought that Autologic made it impossible to incorrectly configure something and cause these types of errors?
Anyway, hope this helps 2006 Discovery 3 TDV6 SE AutoBuckingham Blue 2007 Golf GT DSG
25th Sep 2010 9:02 pm
Tomcat 106
Member Since: 28 Aug 2010
Location: Essex....just
Posts: 160
Many thanks PaulP. I think I need to do more research before playing any more!!
Now where is that search function............
25th Sep 2010 9:37 pm
discoBizz
Member Since: 20 Sep 2008
Location: Manchester
Posts: 1416
Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10350
its when you just touch the indicator stalk in the direction you want, but not actually click it into place - you then get three flashes - useful when just changing lanes.
AlVolvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
27th Sep 2010 10:15 am
discoBizz
Member Since: 20 Sep 2008
Location: Manchester
Posts: 1416
Last edited by discoBizz on 27th Sep 2010 1:12 pm. Edited 1 time in total
27th Sep 2010 10:23 am
woody32 Site Sponsor
Member Since: 11 Mar 2009
Location: Somerset
Posts: 3551
Hi not much help for you tom sorry,but PaulP how would i go about doing this Update the BCU software to a MY07 version, Wanted D4s non runners pm for competitive price.
IID Pro MV License - D3/4 RRS - Enabling, Updates,Transmission flushing.
Mobile or workshop,PM for details.
27th Sep 2010 12:08 pm
Tomcat 106
Member Since: 28 Aug 2010
Location: Essex....just
Posts: 160
Ah Ha...... This is what I would like to know. Do I have to copy the current software from the module to the Autologic then apply to them for the upgrade to be released?
27th Sep 2010 12:45 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
woody32 wrote:
Hi not much help for you tom sorry,but PaulP how would i go about doing this Update the BCU software to a MY07 version,
Not with Autologic obviously
You need to flash the car with later software ..then activate it in the cars ccf fileG4 Gone ...but not forgotten
27th Sep 2010 12:59 pm
SteveNorman
Member Since: 14 Oct 2005
Location: Somerset
Posts: 1145
I have been able to enable three flash on 06MY onwards, but 05MY I have had some not work.
With IDS or similar update the BCM to latest spec, then enable in CCF......as wiggs says
Regards
Steve
27th Sep 2010 2:14 pm
woody32 Site Sponsor
Member Since: 11 Mar 2009
Location: Somerset
Posts: 3551
Cheers wiggs and steve Wanted D4s non runners pm for competitive price.
IID Pro MV License - D3/4 RRS - Enabling, Updates,Transmission flushing.
Mobile or workshop,PM for details.
27th Sep 2010 9:58 pm
woody32 Site Sponsor
Member Since: 11 Mar 2009
Location: Somerset
Posts: 3551
Hi all, got the chance to play with a KTS 650 next week, but is this any good on the disco Wanted D4s non runners pm for competitive price.
IID Pro MV License - D3/4 RRS - Enabling, Updates,Transmission flushing.
Mobile or workshop,PM for details.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
. Cleared all these and was just left with B1B02 - 28 and B1C57-14 both from the BCM not sure how significant they are ( Starts and Runs no probs with no fault shown on dash)
)
Cheers wiggs and steve 
