After some info from you knowlegdable guys, I have the WT-009 GSM Dail to Open device that controls my FBH, I have just ordered a Traxide Dual system from Drivesafe and I was thinking of wireing up my system so that when the FBH is running it will also power up the front Heated screen.
My problem is that the second supply on my GSm unit does not work, is there a way to use the line that powers the FBH to also switch on the heated screen, I will of course need to supply the current from the second battery...
Flack
29th Oct 2010 6:51 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
do you have the oval timer ?...you could use that to trigger a relay ( switch on ) then take the power from the aux battery .
Your gonna need it as the windscreen draws around 50 ampsG4 Gone ...but not forgotten
29th Oct 2010 6:57 pm
Ent
Member Since: 12 Oct 2007
Location: In the cack
Posts: 6488
wiggs wrote:
do you have the oval timer ?...you could use that to trigger a relay ( switch on ) then take the power from the aux battery .
Your gonna need it as the windscreen draws around 50 amps
65amp, thicko Club Exped trailer
Club Timed Climate
Club Flappy paddle steering wheel
Club 300bhp
Club Prospeed test pilot/lab rat
Club National Luna Stella conditioner
29th Oct 2010 7:05 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Ohhhh me bad
If i didn't have about 10 thousand things running round my head ..i should of remembered that ....unlike you ..just bring the eberspacher with you today ...gaylordG4 Gone ...but not forgotten
Yes wiggs I do have the oval timer, so how would I wire it up, I know I will have to use the trigger wire from the timer to latch the relay but how do I wire the screen to use my aux battery ?.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum