- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
StornowaySA
Member Since: 23 Sep 2007
Location: Adelaide
Posts: 406
  
|
| D4 rubber mats = holes in back carpet missing? |
|
All, in my D3 I had clearly idenified holes to screw the lugs that hold the rubber mats in place. My D4 doesnt seem to have any such holes....is that normal?
cheers MY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.
|
 31st Oct 2010 11:16 pm |
|
|
doubledoom
Member Since: 09 Jul 2010
Location: Lowestoft
Posts: 132
|
| Re: D4 rubber mats = holes in back carpet missing? |
|
StornowaySA wrote:All, in my D3 I had clearly idenified holes to screw the lugs that hold the rubber mats in place. My D4 doesnt seem to have any such holes....is that normal?
cheers
Its funny you say that as its something I noticed with my D4. My previous cars have had connection points for the front and rear mats to hold them in place. The D4 didnt have them for the rears. So, they basically begin to slide under the chair in front after a while.
I would be interested to know if that is normal or not as well.
|
| 1st Nov 2010 12:51 am |
|
|
caverD3
Member Since: 02 Jul 2006
Location: Oberon, NSW
Posts: 6922
|
I cut some rubber sheeting from Clark Rubber to the shape of the footwells. Doesn't move and can be swept out.  “There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely gamesâ€
Ernest Hemmingway
D4 3.0 Active Diff, Adaptive Lights, High Beam Assist, Surround Cameras, Privacy Glass.
D3 2.7:Adaptive Headlights,Electronic Rear Diff,ARB Bar,Blaupunkt Speakers,JVC Powered Subwoofer,Removable Snorkel,Mitch Hitch,Pioneer After Market Head Unit,Steering Wheel Control Adaptor,Remote Adjustable Supension Rod System, Taxside Dual Battery System.
|
| 1st Nov 2010 1:22 am |
|
|
ijwoo1
Member Since: 04 Jul 2010
Location: London
Posts: 31
|
I have the "Premium" non-rubber mats and they also slide about. For £150 I was expecting bettrer and thicker.
Ive used heavy duty velocro to stop it sliding and curling at the edges. Its the type where one half of the velcro is more like plastic than tape. Ive stuck it to the underside of the mats and it just about grips the carpet underneath, enough to stop it sliding.
|
| 1st Nov 2010 7:02 am |
|
|
SazzaG
Member Since: 30 Jan 2010
Location: Sussex
Posts: 106
|
That's odd! My D4 (March 10) has the lugs to hold the rubber mats in place.
|
| 1st Nov 2010 9:07 am |
|
|
StornowaySA
Member Since: 23 Sep 2007
Location: Adelaide
Posts: 406
|
In the back too??? MY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.
|
| 1st Nov 2010 9:45 am |
|
|
Dexter
Member Since: 21 Sep 2007
Location: Aberdeenshire
Posts: 1394
|
My D4 rubber mats came with a pack of fixings which you had to screw into the carpets to suit. The instructions showed to lay the mats in place and poke a hole through where the holes were with a sharp screwdriver, then lift the mats and screw the pegs in place, into the holes the screwdriver had made in the carpets, before final laydown of the mats and securing with the quarter turn clips (similar to D3).
Make the sure the rear mats are positioned correctly before making the holes as they can foul the bottom of the rear door pockets if not.
Dex
|
| 1st Nov 2010 11:09 am |
|
|
SazzaG
Member Since: 30 Jan 2010
Location: Sussex
Posts: 106
|
Ah, that may be the answer then - mine were dealer fitted.
The lugs are only in the 1st and 2nd rows.
|
| 1st Nov 2010 12:58 pm |
|
|
fcb1230
Member Since: 24 Oct 2010
Location: Redhill
Posts: 19
 
|
Does anyone know where to get the fixings? My D3 doesn't have any lugs or fixing points in the carpets. I also would like to know where I can get some heavy duty, value for money, rubber floor mats?
Cheers
|
| 1st Nov 2010 5:52 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
