Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Maintenance & Mods (D3)

Discovery 3 OEM Hands free
Post Reply  Down to end
Page 1 of 1
44PN
 


Member Since: 04 Aug 2024
Location: Lancashire
Posts: 3

United Kingdom 2005 Discovery 3 4.4 V8 SE Auto Zambezi SilverDiscovery 3
Discovery 3 OEM Hands free

Hello I know this has been asked before but it always seems to go quiet but has anyone actually managed to retrofit OEM Bluetooth my disco is a 2005 se and currently has one of those very annoying parrot systems fitted but I’d rather rip that out and use the Land Rover system I know I’ll need the module and the buttons for the side of the steering wheel but what else - Thank you
  
Post #23745815th Aug 2024 6:20 am
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10679

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

The disco 4 BT is much better and much easier to retrofit, so ppl go that route.

You need gap iid £450
You need to 6cd player with the orange optical bus

Guide
https://www.disco3.co.uk/forum/d4-bluetoot...-1170.html




If you have the voice button on steering wheel you should already have a mic
Do you have the colour display in Center ?
 

Last edited by Pete K on 5th Aug 2024 7:02 am. Edited 1 time in total 
Post #23745845th Aug 2024 6:40 am
View user's profile Send private message View poster's gallery Reply with quote
44PN
 


Member Since: 04 Aug 2024
Location: Lancashire
Posts: 3

United Kingdom 2005 Discovery 3 4.4 V8 SE Auto Zambezi SilverDiscovery 3

Hello thank you for the reply yes I have the 6 disc changer and the screen sat nav but no I don’t have a voice Button or the answer and hang up thank you
  
Post #23745865th Aug 2024 6:53 am
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10679

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

Voice button is on the far left of wheel.

I thought u would have that if you have nav.
  
Post #23745875th Aug 2024 6:56 am
View user's profile Send private message View poster's gallery Reply with quote
44PN
 


Member Since: 04 Aug 2024
Location: Lancashire
Posts: 3

United Kingdom 2005 Discovery 3 4.4 V8 SE Auto Zambezi SilverDiscovery 3

No I have defiantly got the sat nav screen but no button on steering wheel although the link you have sent me for that thread is just fitting the d4 module to a d3 but mine wont have any of the modules so ideally i need a guide to retrofitting thanks
  
Post #23746365th Aug 2024 7:34 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10679

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

So mine was like yours. No factory BT.
I just fitted D4 module, set fitted with gap iid tool (have to do that if it’s a d3 or d4)
And it works.

Fitting D4 is just 2 power wires (as seen in the pic above)
And an orange fibre adapter loop £12

Where as fitting D3 factory would be loads of wires and the orange fibre again.
Ok, you may not need all those d3 wires, I can’t remember.

And the D4 is far better for BT,
Where as D3 BT is poor

Many ppl have done the d4 fit from scratch
  
Post #23746375th Aug 2024 8:03 pm
View user's profile Send private message View poster's gallery Reply with quote
KPTV8
 


Member Since: 05 Feb 2012
Location: Itinerant !! (Scotland/Donegal)
Posts: 187

Scotland 2010 Discovery 4 5.0 V8 HSE Auto Nara BronzeDiscovery 4

I did this twice on D3s in 2012 & 2016, following a thread here by excellent engineer WIGGS Bow down Bow down
Bought the JLR mic., which fits inside the panel containing the front internal light switches behind/above the mirror. I MIGHT have one of those mics stashed somewhere if you can't find one ?
Bought the JLR steering wheel pickup/hangup switches, also the D4 BT unit.
Needed a tweak to the CCF using IID tool, also orange fibre bus extension, and pair of power wires (DON'T forget to fit a FUSE !!!)
Best to search for those postings by WIGGS; good description & photos.
You'll get a really good hands-free setup.
I found there was JUST enough room to slide the BT unit into a free slot in the central HiFi stack, instead of stuffing it behind internal trim. I was worried this might be a bad idea due to blocking ventilation/cooling of electronics, but in practice nothing ever seemed to get too hot.
Cheers Smile))
  
Post #23746736th Aug 2024 2:12 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10679

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

wiggs guide

https://www.disco3.co.uk/gallery/albums/us...itting.pdf

where the module is fitted up front.
  
Post #23746746th Aug 2024 3:03 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site