Member Since: 20 Dec 2008
Location: glasgow
Posts: 23
FBH White Smoke Screeen With Pictures
Now i have been able to reset my fbh all i get is white smoke which you cant see through and have to pull fuse for it to stop i have had it running for approx over 1 hour.
Now i think i may have a cloged filter bit where the glow plug is, does any one have instructions to disasemble and clean. (with pictures would be better)thanks
Last edited by alsdisco on 7th Feb 2011 5:23 pm. Edited 1 time in total
7th Feb 2011 4:05 pm
hensoni
Member Since: 01 Oct 2007
Location: Sleepy Somerset
Posts: 576
Leave it running. It'll clear eventually. I only get a wisp of white smoke on start up now that mine is running nicely.Club missing my D3
7th Feb 2011 4:19 pm
dsd1036
Member Since: 27 Feb 2010
Location: Surrey
Posts: 2692
I had mine purged and rest recently(didn't i Geoff)lol.
During the purge and test set up by a faultmate it didn't smoke much but i didn't expect it too, as it had been working ok.
However drove off and after about 5 minutes i had oncoming traffic, waving,flashing me and even a fella in a Travis Perkins van, said"get out of the car man, its on fire"" as i carried on my way laughing to myself.
It will clear, so let it run,it will clear all the built up deposits etc!
Darrell
7th Feb 2011 4:31 pm
martin2910
Member Since: 15 Aug 2010
Location: Aberdeenshire
Posts: 11
If it's smoking it's working!! Wish my one would work, got a mind of it's own.
7th Feb 2011 4:54 pm
alsdisco
Member Since: 20 Dec 2008
Location: glasgow
Posts: 23
im not sure it will clear if car stands still and there is no wind you cannot see where you are going the smokes that thick i have posted some pictures of the smoke starting but i could not stay there to long as cant hold my breath that long
surely an hour of running should have cleared
i have also added redex fuel additive with no luck
pictures are in my gallery i think
7th Feb 2011 5:21 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
7th Feb 2011 5:27 pm
lad
Member Since: 17 May 2008
Location: Blackburn
Posts: 634
I know you are on about white smoke but have a look at wiggs heater here
7th Feb 2011 5:49 pm
dsd1036
Member Since: 27 Feb 2010
Location: Surrey
Posts: 2692
Yes see wiggs video, but thats been purged by a faultmate at a guess and although entertaining its not the norm!, if yours is doing this after a reset, what did you use to reset it with? I have an FCR which i could use to reset the FBH but as it can't purge the system, can't create the white smoke!
Dunno if a stealers reset, can purge too but i doubt it
Darrell
7th Feb 2011 6:34 pm
alsdisco
Member Since: 20 Dec 2008
Location: glasgow
Posts: 23
Thanks bodsy for putting picture up I couldn't figure that out
I have the oval timer fitted which resets and I can turn on any time should I keep burning will it clear it's self
7th Feb 2011 9:00 pm
irl32
Member Since: 27 Aug 2009
Location: Co Mayo
Posts: 66
Does the FBH always come on when you start the engine ? how would i check to see if mine is running.
5th May 2011 10:51 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
it wouild only normally come on when the temp is 5degrees C or less.
I think alphagt has just bought a faultmate that can purge it for you. Not sure of distance from you, only that he's in Ireland.... Bodsys Brake Bible
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
