Andrew M
Member Since: 07 Dec 2010
Location: Northants
Posts: 2
  
|
Hi, Newbie here 8) I have a problem with my D3 brakes. Apparantly the brake line running from the front servo to the rear offside wheel is steel (not stainless) and has rusted where one of the mounting clips is positioned, resulting in brake fluid being pumped all over the other hoses and exhaust. My local independant is going to replace it but it appears to be a one piece line. He has proposed using standard copper brake line modelled on the existing line. Has anybody come across this problem before as it seems strange that it is just steel that would be likely to rust over a period of time. Thanks, Andrew M.
|
 7th Dec 2010 10:32 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
Has happened to a few so far (and likely more in the future) Your Indi is doing pretty much the same as most others will do as it happens.  Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 7th Dec 2010 10:38 pm |
|
|
Andrew M
Member Since: 07 Dec 2010
Location: Northants
Posts: 2
|
Hi Bodsy, Many thanks for your prompt reply. Andrew M. 8)
|
| 7th Dec 2010 10:44 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
Hope you're a Saints fan (Northampton being my home town) Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 7th Dec 2010 11:20 pm |
|
|
