Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO4.COM > General (D4)

Help please: "LAND ROVER" Bonnet Badge
Post Reply  Down to end
Page 1 of 1
RichardB
 


Member Since: 03 May 2010
Location: Hants
Posts: 485

United Kingdom 2010 Discovery 4 3.0 TDV6 XS Auto Nara BronzeDiscovery 4
Help please: "LAND ROVER" Bonnet Badge

Is anyone with a recent D4 able to do a quick favour of either/both:

1) Measuring the distance from the leading/bottom edge of the bonnet to the bottom of the (first) R in ROVER
2) Post a reasonably close up picture of the LAND ROVER badge with the top edge of grill showing.

Just had the badge replaced and it looks like it's been stuck on too close to the bottom edge of the bonnet now Sad

Ta very much.  
Post #75026721st Jan 2011 2:07 pm
View user's profile Send private message View poster's gallery Reply with quote
PaulP
 


Member Since: 04 May 2007
Location: Barcelona
Posts: 4317

Spain 2006 Discovery 3 TDV6 SE Auto Buckingham BlueDiscovery 3

Richard - there's a picture in your gallery of your own D4 with the original badge back in October last year...

Couldn't you just open the original high-resolution image and compare the gap to the size of the letters - the letter size will be constant in both the old photo and the ones that are actually on the car?

I might be quicker than waiting for someone to take a photo for you??

Cheers,
Paul 2006 Discovery 3 TDV6 SE Auto Buckingham Blue
2007 Golf GT DSG  
Post #75029721st Jan 2011 3:08 pm
View user's profile Send private message View poster's gallery Reply with quote
RichardB
 


Member Since: 03 May 2010
Location: Hants
Posts: 485

United Kingdom 2010 Discovery 4 3.0 TDV6 XS Auto Nara BronzeDiscovery 4

Doh Embarassed - Completely forgotton about that one - I'd looked at others and none were front on but more artistically from the front quarter. And it's a 12Mb+ Nikon Raw image too...

A direct measurement to the R would be really welcomed though.  
Post #75031621st Jan 2011 3:46 pm
View user's profile Send private message View poster's gallery Reply with quote
ronp
 


Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15264

Scotland 2014 Discovery 4 3.0 SDV6 HSE Auto Corris GreyDiscovery 4

Check out jjvd1's gallery.
He's done a lot of measurments in that area.
It's ref the D3, but reckon it's same as D4
http://www.disco3.co.uk/gallery/index.php?cat=12824 ...... always on the road less travelled 🚧  
Post #75035121st Jan 2011 5:08 pm
View user's profile Send private message View poster's gallery Reply with quote
PaulP
 


Member Since: 04 May 2007
Location: Barcelona
Posts: 4317

Spain 2006 Discovery 3 TDV6 SE Auto Buckingham BlueDiscovery 3

OK...I've just been out to the car park with my trusty leatherman to do some measurements.

Note that I've got a D3, but I see no reason why the distances would have been changed for the D4 - they certainly look the same in all the photos/cars I've seen.

I took the measurements flat against the bonnet/letters (probably an angle of around 60° to the horizontal).

Using my finger as a stop on the bottom edge of the bonnet, the distance to the bottom of the middle "R" is approx 20mm.

Measuring from the top of the radius on the leading edge of the bonnet gives approx 17mm.

I hope this helps Thumbs Up 2006 Discovery 3 TDV6 SE Auto Buckingham Blue
2007 Golf GT DSG  
Post #75035421st Jan 2011 5:13 pm
View user's profile Send private message View poster's gallery Reply with quote
RichardB
 


Member Since: 03 May 2010
Location: Hants
Posts: 485

United Kingdom 2010 Discovery 4 3.0 TDV6 XS Auto Nara BronzeDiscovery 4

Thanks - that's really helpful.

(Spent a while wandering suspiciously round the car park at work and not a single Disco in there today 3 or 4. There are usually a couple at least. Was wondering how I'd explain taking pics of their bonnets to the security guys though.)

I'll be out first thing in the morning to check it out.  
Post #75044521st Jan 2011 7:39 pm
View user's profile Send private message View poster's gallery Reply with quote
RichardB
 


Member Since: 03 May 2010
Location: Hants
Posts: 485

United Kingdom 2010 Discovery 4 3.0 TDV6 XS Auto Nara BronzeDiscovery 4

PaulP wrote:
OK...I've just been out to the car park with my trusty leatherman to do some measurements.

Using my finger as a stop on the bottom edge of the bonnet, the distance to the bottom of the middle "R" is approx 20mm.

Thumbs Up


Hmm. So just measured using a dial gauge. Centre R is actually 18mm from bottom edge which is not much out. But the L and R at either end are 13mm so its not actually properly set along the line of the bonnet and does look wrong.

Back it goes...  
Post #75080422nd Jan 2011 3:53 pm
View user's profile Send private message View poster's gallery Reply with quote
DiscoDad
 


Member Since: 06 Nov 2006
Location: Beautiful Teesdale
Posts: 3004

United Kingdom 2014 Discovery 4 3.0 TDV6 HSE Lux Auto Fuji WhiteDiscovery 4

So a 5mm 'curve' to the lettering there then.

No wonder it looks odd.

When something is that close to an edge most people would notice a difference of only 1 or 2 millimeters.  
Post #75128023rd Jan 2011 7:14 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site