| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
wvlenthe
Member Since: 07 Jan 2009
Location: Arnhem
Posts: 1967
  
|
Hi all,
I have been installing my GVIF today.
All went relatively well but I might have a problem:
During the install I had to turn on the ignition whilst the GVIF was not under power yet. The sat nav screen was flickering white at that time.
After completing the whole install, I had an image from the camera but not from the satnav. I pulled the blue connector from the satnav unit thinking that was the problem. From that moment on, also after reconnecting the cable, I'm getting a message 'satnav not available' on the screen. The camera still does work.
I have not had the time yet to let the car go to sleep and retry.
So the questions:
1 anybody recognise this?
2 will this possibly be cured by sleeping
3 any other suggestions?
regards,
Wiljo D3 V8 HSE Auto in Zermatt silver - driveway version gone but not forgotten, only the living room cupboard version remains
|
 1st Apr 2011 8:23 pm |
|
|
IainC
Member Since: 03 Nov 2009
Location: Aberdeenshire
Posts: 123
|
I'd check out the dip switches TBH, there is one that switches the Sat Nav off IIRC. Certainly when I put mine in to start with I got it wrong (or the manual had them going one way, and mine needed done the other), so with mine, it went black (AV1) by default, then when you hit reverse, the Sat Nav came on. Change of two dip switches and it was sorted.
|
| 1st Apr 2011 8:28 pm |
|
|
wvlenthe
Member Since: 07 Jan 2009
Location: Arnhem
Posts: 1967
|
will try tomorrow.
Thanks
Wiljo D3 V8 HSE Auto in Zermatt silver - driveway version gone but not forgotten, only the living room cupboard version remains
|
| 1st Apr 2011 8:31 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
  
|
Unplug the gvif connectors out of the back of the nav unit .. And put the original back in and test it
Unfortunatly you might of fried the nav unit if you had power on while you were installing it  G4 Gone ...but not forgotten
|
| 1st Apr 2011 8:46 pm |
|
|
wvlenthe
Member Since: 07 Jan 2009
Location: Arnhem
Posts: 1967
|
Unit is ok but one of the connectors seems instable.
Install worked out as desired  learned a lot on how the D3 is put together.
Wiljo D3 V8 HSE Auto in Zermatt silver - driveway version gone but not forgotten, only the living room cupboard version remains
|
| 2nd Apr 2011 6:12 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
