Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > General (D4)

Moving the 13 pin socket from right to left hole
Post Reply  Down to end
Page 1 of 1
t7mbo
 


Member Since: 19 Apr 2007
Location: West Midlands
Posts: 242

United Kingdom 2012 Discovery 4 3.0 SDV6 HSE Auto Orkney GreyDiscovery 4
Moving the 13 pin socket from right to left hole

Just taken the cover off the towing electrics for the first time, and the dealer has fitted the 13 pin electrics to the hole on the right of the towbar when viewing from the back of the car.
This causes problems for me when inserting the plug as it fouls on the bracket which holds the bike carrier.
Is it a difficult job to move the electrics from the right hand hole to the left hand hole?
  
Post #78876422nd Apr 2011 5:16 pm
View user's profile Send private message View poster's gallery Reply with quote
wiggs
 


Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372

United Kingdom 2015 Discovery 4 3.0 SDV6 HSE Auto Fuji WhiteDiscovery 4

Not hard to do ...but you would need to disconnect the plug ( which is just below the passenger rear light ...tucked down into the bumper )

undo the few screws on the socket ..pull it all out .,.then feed it back in the left hole ..reconnect the plug

If you take the rear passenger light lens out you can see the connector
 G4 Gone ...but not forgotten  
Post #78877122nd Apr 2011 5:21 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site