Member Since: 02 Dec 2005
Location: Bradford, West Yorkshire
Posts: 6100
Intermittent front PDC
The front PDC on the new truck seems to be a bit erratic, it always engages with reverse but doesn't always work when going forward towards an object? The manual says it should work below 6mph. Am I doing something wrong or is it my first glitch 2020 BMW X1 18d XDrive X-Line Auto
21st Oct 2006 2:23 pm
DiscoStu
Member Since: 09 Apr 2006
Location: London
Posts: 11412
Member Since: 02 Dec 2005
Location: Bradford, West Yorkshire
Posts: 6100
Thanks Stu, so mine must be setup to cancel above 10mph and only come back on after selecting reverse or pressing the switch!2020 BMW X1 18d XDrive X-Line Auto
21st Oct 2006 2:37 pm
DiscoStu
Member Since: 09 Apr 2006
Location: London
Posts: 11412
Member Since: 11 Jun 2006
Location: East Midlands
Posts: 160
Our 06my school cars do the same
21st Oct 2006 5:01 pm
bkehoe
Member Since: 24 Feb 2006
Location: Wexford
Posts: 1481
I'll be getting them to swap over the PDC module from my old D3 whenever I get a new D3!!! IE - 05 D3 TDV6 HSE - Zambezi Silver
SA - 07 VW Golf TDI - White - Sold!
21st Oct 2006 5:54 pm
oliver77
Member Since: 23 Jun 2006
Location: Mid Wales
Posts: 398
On my second D3 and both have had PDC with a mind of its own. Sometimes it works sometimes it doesn't. Have a new PDC module fitted and that may fix it but mine has had one and it still plays up.
22nd Oct 2006 10:48 am
CFB
Member Since: 02 Dec 2005
Location: Bradford, West Yorkshire
Posts: 6100
The revision is correct, front PDC comes on AUTOMATICALLY when engaging reverse (with rear PDC) then stays on when in D until speed exceeds 10mph. To activate when parking etc you MANUALLY press the dash switch and again it stays active until above 10 mph or ignition off.
I would be interested to know if I can have it re-programmed at the dealer to be always on when in D?2020 BMW X1 18d XDrive X-Line Auto
22nd Oct 2006 12:11 pm
DiscoStu
Member Since: 09 Apr 2006
Location: London
Posts: 11412
The programming is all in the parking aid control module. I think you can either have the old way or the new way, by seleceting an old or new module. I presume that LR would only supply the new module, so if you want it the old way you'd need to find an old module.Disco 5 HSE Lux
https://www.youtube.com/watch?v=peyiqaJrmMU
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum