discoFR LR3
Member Since: 04 Feb 2018
Location: france
Posts: 11
  
|
Problem of compressor I greased solenoid valve, I tested it closes and opens on battery contact; I reassembled the compressor, it rises in pressure 1780kpa and the valve regulates, I have however not the possibility of using the EAS as soon as I actuate the lever fault suspension, I calibrated again, I configured with IDTOOL all that I could, while driving by leaving in standard position not of fault, but I cannot more go up nor to go down the disco without having a fault, an idea of the residual problem?
reccurent pb is C1A13-64 (AF)
|
 7th May 2023 5:29 pm |
|
|
