Member Since: 17 Dec 2011
Location: Hove
Posts: 27
Pics of my light wiring. Help needed.
just took the beast into a local 4x4 land rover specialist to try to get the new HSE lights units fitted to my 59 plate XS, as they are Bi-xenon and have the fairy lights (which work when switched on, but the main beam does not so thought these guys could get them activated)?
BUT on close inspection, there seems to be a mod made to the wiring of the lights, not by me and I really don't think that LR would have done it, so can anyone think why the wiring is as it is? It appears a blue wire has been cut out and re joined with a piece of black and red wire joined together....??? STrange... Will this be causing the lights NOT to work when they are plugged in.
Any help would be greatly appreciated...
To me that looks like the cables been cut (maybe by accident) and then fixed/botched together - I'd go back to the indy and ask why the cut the cable in the first place.
2nd Jan 2012 3:04 pm
D4'er
Member Since: 17 Dec 2011
Location: Hove
Posts: 27
Hmmmm he wasn't sure why they were cut, he thought perhaps maybe to wire up spots??
2nd Jan 2012 3:06 pm
SHARKYSHARKS
Member Since: 20 Dec 2008
Location: Saddleworth Oldham
Posts: 1954
I was under the impression that the lights could only be activated via the vehicles software and not by some botch wiring job
Speak to Pete at BAS im sure he could tell you more MY18 D5 HSE LUX😎
MY12 Freelander SD4 HSE
44 Tonne 12 Litre 6x2 Scania T cab (Current)
Freelander 1 (Wrote off 😫)
Ex D1
Ex D2 GS
Ex V8 D2 GS
Ex D3 S
Ex D4 GS
Club skip ya lockers !!!
Club BAS remote heater !!
Club Duratrac
Club Phillips DRL
Club Prospeed Rack Mk 1
Club Prospeed Rack Mk 2
Club Sankey
Club RLD spare wheel protector
2nd Jan 2012 3:11 pm
D4'er
Member Since: 17 Dec 2011
Location: Hove
Posts: 27
Indeed that is correct, they have a unit that plug into the car, bit like a VAG com I guess and can code the car to accept lights BUT there is an issue with that wiring and I wonder why on earth it looks like that, and of course if it will have an effect on the outcome of the re-programing... Need someone local with a faultmate, but Im in Sussex, I don't think anyone close has one..
2nd Jan 2012 3:14 pm
SHARKYSHARKS
Member Since: 20 Dec 2008
Location: Saddleworth Oldham
Posts: 1954
D4er
I would peel the tape back and see if they have connected a diode in the circuit and if not re connect the wires as they should be and start from there MY18 D5 HSE LUX😎
MY12 Freelander SD4 HSE
44 Tonne 12 Litre 6x2 Scania T cab (Current)
Freelander 1 (Wrote off 😫)
Ex D1
Ex D2 GS
Ex V8 D2 GS
Ex D3 S
Ex D4 GS
Club skip ya lockers !!!
Club BAS remote heater !!
Club Duratrac
Club Phillips DRL
Club Prospeed Rack Mk 1
Club Prospeed Rack Mk 2
Club Sankey
Club RLD spare wheel protector
2nd Jan 2012 3:26 pm
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
If its blue with a gray/silver trace its for the main beam and will go to pin 10 of the connector.
Their are only 2 tools that can code and change the CCF on this and they are the Faultmate and possibily Autologic though im not sure on AL, Even the dealer cant do it.
If the car is a non Xenon car and has not ever had xenons fitted you WILL need them coding no matter what you do. The FET in the BCU is designed to sense changes and over voltages and cut power to the light incase of a fault of which its doing when you add the current dragging xenons V the halogens.
Pete
2nd Jan 2012 3:40 pm
D4'er
Member Since: 17 Dec 2011
Location: Hove
Posts: 27
Superb Pete thank you for your help, It is indeed a blue wire with silver fleck but although xenons are not yet activated, once they are can you foresee any other problem with the lights as the wiring has been tampered with?
2nd Jan 2012 3:50 pm
Bill Wright
Member Since: 03 Nov 2007
Location: Glorious Devon
Posts: 3254
Pete fitted mine. If I were you, I'd get in touch with him and see if he's heading south anytime soon and arrange a meeting to flash up the lights.
Bill WrightNever take life too seriously. Nobody gets out alive anyway.
D4 SDV6 SE Tech Kaikoura Stone MY15.
2nd Jan 2012 3:59 pm
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
The activation is for dipped beam xenon, the wire is for main beam so are not connected hence no reason you should have any problem with the xenon dipped beam once activated.
Repair the wire and make it nice its probabally from a spot light bodge at some point.
2nd Jan 2012 3:59 pm
D4'er
Member Since: 17 Dec 2011
Location: Hove
Posts: 27
WHOOP WHOOP!!! Sounds like Im getting there now..
OK, so.....Pete, is there any chance you will be down this neck of the woods in the near future??
Otherwise Ill try to get a day I can visit..
N1 Bill,
2nd Jan 2012 7:16 pm
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
Hi
My show season starts down south in July. I won't be much south until then sorry.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
