Flashpscene
Member Since: 14 Apr 2021
Location: Chesterfield
Posts: 2
|
Sorry if this is in the wrong place, just scanned the 2.7tdv6 09 and got fault code P1335-00 (crank not detected while starting) starts ok, cleared the fault and scanned with just ignition and it comes straight back on. Any ideas?
|
20th Apr 2021 4:16 pm |
|
|
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459
|
Can you check live values? Check your crank sensor readings.
Its rare for the sensor to fail but it does happen there was a post about a month ago with a simular issue.
https://www.disco3.co.uk/forum/27-tdv6-200...ank+sensor
The member does state that if you have a simular fault feel free to contact him. Andrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
|
20th Apr 2021 5:45 pm |
|
|
Flashpscene
Member Since: 14 Apr 2021
Location: Chesterfield
Posts: 2
|
I still haven’t managed to find the time to check in the values but the confusing points are, it starts and runs first time every time and the code comes up in older posts linked to the egr. The egr had been blanked and mapped out but if this is an egr fault I can understand why it keeps coming back.
|
21st Apr 2021 7:01 pm |
|
|