colinsb
Member Since: 01 Jul 2012
Location: Near Gatwick
Posts: 14
  
|
| Suspension goes straight from access to extended height |
|
Apart from sorting out Bluetooth, I only have one mystery with the 55MY D3 SE. When I select access height, it goes down then goes straight back up to extended height. Am I do something wrong or is this a problem?
|
 16th Jul 2012 8:58 pm |
|
|
DSL
Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73088
|
Deffo a problem, not normal. Car thinks it's grounded, height sensor issue?
|
| 16th Jul 2012 9:04 pm |
|
|
Ivan
Member Since: 01 Mar 2011
Location: Malvern Worcestershire
Posts: 690
|
It could also be a blocked exhaust valve on the compressor. I have this problem at the moment with mine (waiting for the bits to arrive from blighty). If you look at the fault codes it says it can't exhaust the gallery (or something like that). It can't exhaust the air so it thinks it's stuck.
HTH
Ivan 2013 RR Vogue SE SDV8
2013 Freelander 2 HSE Luxury SD4
|
| 17th Jul 2012 12:04 am |
|
|
caverD3
Member Since: 02 Jul 2006
Location: Oberon, NSW
Posts: 6922
  
|
Ditto for above an easy fix. You can take the dyer canister off and sieve and dry the beads before putting back.  “There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely gamesâ€
Ernest Hemmingway
D4 3.0 Active Diff, Adaptive Lights, High Beam Assist, Surround Cameras, Privacy Glass.
D3 2.7:Adaptive Headlights,Electronic Rear Diff,ARB Bar,Blaupunkt Speakers,JVC Powered Subwoofer,Removable Snorkel,Mitch Hitch,Pioneer After Market Head Unit,Steering Wheel Control Adaptor,Remote Adjustable Supension Rod System, Taxside Dual Battery System.
|
| 17th Jul 2012 2:55 am |
|
|
SpiderBaby
D3 Decade
Member Since: 21 Sep 2007
Location: Liverpool
Posts: 1411
 
|
Again ditto - had the same some time back - either dry the beads and sieve them or just put fresh in.
A member on here found a source of them at a cheap rate. I see no ships........
|
| 17th Jul 2012 7:11 am |
|
|
colinsb
Member Since: 01 Jul 2012
Location: Near Gatwick
Posts: 14
|
I still haven't found all the beads that escaped the last time I had a compressor apart! 
|
| 17th Jul 2012 12:52 pm |
|
|
