Member Since: 01 Jul 2009
Location: Up North
Posts: 270
Sean,
If you are in a rush any garage with an Autologic should be able to activate it. A quick google says Brooklyn 4x4 have Autologic.
Might be worth a telephone call to make sure their software is up to date and they are happy to do it. Shouldn't be longer than 10 minutes. And you can get your timed climate done/tow electrics also if needed at the same time.
28th Jan 2014 8:36 pm
sj9011
Member Since: 04 Jun 2011
Location: Southampton
Posts: 356
Cheers Stenh02, I know Brooklyn and they are very very busy but worth a try, tow electrics where done by Pompy dealer, but still need the remote heater and camera done so i'll give them a try, I really need the reversing camera as I back up to lots of different trailers and already have a couple of dings on the bumber
Cheers
Sean
28th Jan 2014 8:40 pm
stenh02
Member Since: 01 Jul 2009
Location: Up North
Posts: 270
Is the thread with the distorted pics on the video diagnostic screen to hopefully put your mind at rest.
28th Jan 2014 8:42 pm
sj9011
Member Since: 04 Jun 2011
Location: Southampton
Posts: 356
Yes thank you it is exactly what I have with the green band at the bottom.
Cheers
Sean
28th Jan 2014 8:47 pm
Trigger
Member Since: 11 Nov 2012
Location: Gone
Posts: 295
28th Jan 2014 9:21 pm
Inigo
Member Since: 28 Feb 2012
Location: Kent
Posts: 301
I'm trying to fit a rear view camera to my 2011 D4 Commercial.
I don't appear to have the power and Fakra connectors already in the loom. I have run a coaxial cable to the front for the video signal, and was going to tee into the auxiliary power socket in the rear, when I found this connector behind the rear quarter panel, covered in foam and taped up:
Click image to enlarge
Can anyone tell me what it is for and if I can use it to power my camera. Cables colours are green/white and black/white which I was hoping might signify 12V + earth.
24th Feb 2015 11:16 am
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
It looks like an airbag connector. Steer clear of it.
you can use the rear Aux socket, or you can also use the reverse light 12v supply so it only comes on when the reverse camera is on. But the reverse screen will be on for longer than the reverse lights, so ign switched live may be better. Depends on how you want to do it, but both ways will work.Bodsys Brake Bible
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
24th Feb 2015 11:21 am
Inigo
Member Since: 28 Feb 2012
Location: Kent
Posts: 301
Ah, OK, thanks.
24th Feb 2015 11:31 am
lordackers
Member Since: 02 Mar 2015
Location: Castleford
Posts: 97
Hi Guys,
Newbie to the site, loads of great stuff on here.....
I'm looking to retro fit to my D4 2012MY but can someone supply me a link to TLO to order the parts required please?
LLR021100 - microswitch with camera wiring - £ 30.88
LLR023365 - camera(rear view only, analogue) - £102.66
LLR015458 - tailgate loom with camera wiring - £ 90.51
Many thanks
GrantD4 XS 2012 black with black
Blackview DR6000
Boot shelf
Cannondale EVO hiMod
Defender 90 1996 Epson green
Vogue TDV8 2006 black with black
Vogue TDV6 2005 black with parchment
Vogue TDV6 2003 black with ivory
Vogue SE 4.4V8 black with parchment
2nd Mar 2015 11:36 am
lordackers
Member Since: 02 Mar 2015
Location: Castleford
Posts: 97
Hi Guys,
Right I've got all the wires fitted and been to Green Oval in leeds today to get the camera activated, Dealt with a chap called Brian, very helpful but we didn't managed to get things sorted just got the black screen
He is using the auto logic system, but we couldn't find two settings as mentioned Triumph_dave, so can anyone help with the auto logic settings or is there anyone near me WF10 West Yorkshire with a fault mate system?
Brian also mentioned that I have a faulty headlight, I've only had the car 3 week and Rocar Moores put a 12 month MOT on it before I picked it up, I wonder how they did that with a faulty headlight???
Thanks
GrantD4 XS 2012 black with black
Blackview DR6000
Boot shelf
Cannondale EVO hiMod
Defender 90 1996 Epson green
Vogue TDV8 2006 black with black
Vogue TDV6 2005 black with parchment
Vogue TDV6 2003 black with ivory
Vogue SE 4.4V8 black with parchment
26th Mar 2015 3:22 pm
stenh02
Member Since: 01 Jul 2009
Location: Up North
Posts: 270
What do you mean by black screen?
When you select reverse do you get the black and white image of the car or a blank screen?
If it's a blank screen and you touch it does it then revert back to the image of the car?
If not then the CCF write hasn't worked. There are two settings.
Member Since: 02 Mar 2015
Location: Castleford
Posts: 97
Hi Stenh02
Thanks for your response...
On selecting reverse I get the blank screen, press it and I get the normal car sensor reverse image....
I showed that forum topic to Brian at Green Oval yesterday but he could only find one setting with his Autologic diagnostic tool
Just need to find a man with IIDtool or Faultmate to change the second setting I think? CDS (site sponsor) has offered to do this for me when he is over my way, just hope its soon
Thanks
GrantD4 XS 2012 black with black
Blackview DR6000
Boot shelf
Cannondale EVO hiMod
Defender 90 1996 Epson green
Vogue TDV8 2006 black with black
Vogue TDV6 2005 black with parchment
Vogue TDV6 2003 black with ivory
Vogue SE 4.4V8 black with parchment
27th Mar 2015 2:03 pm
will247
Member Since: 05 Jan 2013
Location: York
Posts: 709
Is it the same camera and loom part numbers for MY15?
I'm defiantly going to fit this Didn't realise it would be that easy!26 and on the 4th LR..
Series 2a 1963 88'' 2.25 Derv as original with Galv chassis
Disco 1 1996 V8 on LPG (sold now)
Disco 3 2005 TDV6 S (sold now)
Disco 4 MY15 XS Commercial
27th Mar 2015 4:44 pm
stenh02
Member Since: 01 Jul 2009
Location: Up North
Posts: 270
That happened when I intalled mine. I hadn't pushed the fakra cable in far enough to the back of the sat nav head unit or the join below the gear selector.
The car is looking for the input as it goes to the blank screen. So CCF seems to have been updated. Check connections are secure. A bit of a faff but worth a shot.
Regarding the 2015MY - I am not sure if it's the same job. Pre 2012 was a different connector to post 2012 and the newer cameras are different (worse?) in the newer models. Maybe someone who has done a newer MY will tell us.
27th Mar 2015 5:00 pm
lordackers
Member Since: 02 Mar 2015
Location: Castleford
Posts: 97
Hi stenh02 I'll try the con extort tomorrow and see if that resolves the problem
Will keep you posted
Thanks
GrantD4 XS 2012 black with black
Blackview DR6000
Boot shelf
Cannondale EVO hiMod
Defender 90 1996 Epson green
Vogue TDV8 2006 black with black
Vogue TDV6 2005 black with parchment
Vogue TDV6 2003 black with ivory
Vogue SE 4.4V8 black with parchment
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
just got the black screen
Didn't realise it would be that easy!
