Member Since: 03 Jul 2017
Location: Huthwaite
Posts: 71
New loom get problems
All week I’ve been upgrading the loom from an S to HSE.
After finally getting it all in, dash and interior, I have got a couple of plugs that are loose under the drivers side, there’s no where to plug them in, and 3 codes coming up.
All fuses,F18,F17 and 42,57,58,52,53 are all ok.
Audio System
U2003-31 (2B) Fibre optic communication bus - Frequency modulation/pulse width modulation failure - no signal
U2003-25 (2B) Fibre optic communication bus - General signal failure - signal shape/waveform failure
Vehicle Dynamic
C1A96-62 (0B) Brake lamp switch circuit - Algorithm based failure - signal compare failure
22nd Jun 2020 5:05 pm
D3White Night
Member Since: 03 Jul 2017
Location: Huthwaite
Posts: 71
Getting these codes now
Audio System
U1A03-62 (2B) Vehicle configuration parameter - Algorithm based failure - signal compare failure
U2003-31 (2B) Fibre optic communication bus - Frequency modulation/pulse width modulation failure - no signal
U2003-25 (2B) Fibre optic communication bus - General signal failure - signal shape/waveform failure
Vehicle Dynamic
C1A96-62 (0B) Brake lamp switch circuit - Algorithm based failure - signal compare failure
Terrain Response
U0416-94 (27) Invalid data received from vehicle dynamics control module - Component failure - unexpected operation
Engine TDV6
P1935-00 (25) Brake switch/sensor signal
22nd Jun 2020 5:38 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14139
Wonder if there for a memory seat module, ??
Here’s a pic of mine when I bought memory seats and then removed it
Or maybe For an amp seeing there are MOST errors
Hope that may help and ur refit is nearly done
Click image to enlarge
22nd Jun 2020 5:42 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14139
Plus just in case , here’s a full wiring manual so may help u identifying wire colours
Member Since: 03 Jul 2017
Location: Huthwaite
Posts: 71
Yeh I’m thinking new amp
As for the memory seat module(big grey plug) that’s sat under the seat.
The green plug is the one that’s bothering me. It all worked fine, well I had no power to the amp, until I put the HSE dash loom in.
This is the plug I’m missing from the dash loom(this is the old one)
22nd Jun 2020 5:58 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10689
I think you best find out why the brake lights aren't working.
Important on these cars.
Note the colours at the switch . They probably goto the fuse box
22nd Jun 2020 6:07 pm
D3White Night
Member Since: 03 Jul 2017
Location: Huthwaite
Posts: 71
D3White Night wrote:
Getting these codes now
Vehicle Dynamic
C1A96-62 (0B) Brake lamp switch circuit - Algorithm based failure - signal compare failure
Terrain Response
U0416-94 (27) Invalid data received from vehicle dynamics control module - Component failure - unexpected operation
Engine TDV6
P1935-00 (25) Brake switch/sensor signal
These it seems was the steering angle if anyone would like to know.
Reset the steering angle and now sorted. No faults!
22nd Jun 2020 6:13 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
Have you sorted the audio fault codes? I’m just wondering if you’ve changed the CCF to a MOST based system?012MY RRS 5.0 Supercharged Autobiography (Current)
Mods:
TPMS (Complete but got an issue)
Genuine LR DRLs (Complete)
Remote Boot close from key fob (Complete)
2016 Discovery 4 Mirrors AKA RRS2 (Complete)
2014 L405 Surround Camera retro fit (Now 2016 L319)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE (Complete)
2014 LR4 Homelink (Complete)
2016 FFRR Electrochromatic Wing Mirror Glass (Complete)
23rd Jun 2020 8:19 pm
D3White Night
Member Since: 03 Jul 2017
Location: Huthwaite
Posts: 71
No bobby.
Just bought an amp from sea raider so hopefully that will sort my codes out.
As for ccf, I’ve changed it to 6 cd but my IIDControl isn’t finding the amp so...
29th Jun 2020 3:06 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
When you go into the Car Cofig tab on the IID menu, does it give you 2 options? Confirmed and complete? If you only have confirmed, you need to email a request to GAP who will then give you access to the complete list. They make it a request requirement so that you don’t accidentally go in and mess up (brick) your car.012MY RRS 5.0 Supercharged Autobiography (Current)
Mods:
TPMS (Complete but got an issue)
Genuine LR DRLs (Complete)
Remote Boot close from key fob (Complete)
2016 Discovery 4 Mirrors AKA RRS2 (Complete)
2014 L405 Surround Camera retro fit (Now 2016 L319)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE (Complete)
2014 LR4 Homelink (Complete)
2016 FFRR Electrochromatic Wing Mirror Glass (Complete)
29th Jun 2020 3:21 pm
D3White Night
Member Since: 03 Jul 2017
Location: Huthwaite
Posts: 71
When I first bought the IIDControl it did but now I have just the one.
Just says ‘confirmed list....’
I wondered what happened to it lol
Is there a particular person I need to email and ask for the ‘complete list’?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
