the kergan
Member Since: 01 Dec 2008
Location: Swindon Wiltshire
Posts: 535
  
|
| Reversing mirrors, mind of there own |
|
Hi I have the mirrors that dip when im in reverse, however when i put the car in reverse they dip down fine but a few seconds into reversing they come back up on their own and then a second or two later they decide to dip back down again.
Has anyone had this issue or know how to get over it.
Thanks in advance.  I have something to say! It's better to burn out... than to fade away!
|
 3rd May 2013 3:21 pm |
|
|
JonM
Member Since: 24 May 2012
Location: North Yorkshire
Posts: 1247
|
It's speed related, if you reverse slowly the stay down. If you go above a set speed (I haven't worked out exactly how fast) they lift up and then if you slow down again they dip again.
I only discovered that a few weeks ago when I had a long straight reverse to do - I don't normally reverse fast enough for them to lift up.
I think it's really useful.
|
| 3rd May 2013 4:36 pm |
|
|
the kergan
Member Since: 01 Dec 2008
Location: Swindon Wiltshire
Posts: 535
|
Ah well that answers it. Thanks for that. I wondered why it sometimes done it I have something to say! It's better to burn out... than to fade away!
|
| 3rd May 2013 4:39 pm |
|
|
Farmer Chalk
Member Since: 06 Mar 2013
Location: Independent Republic of Kentishshire.
Posts: 4197
  
|
Are they also dependant on steering wheel angle input? Still undecided whether I like them or not.... Sometimes as your reversing and your trying to fit in a gap they move unannounced and I find it most off putting? End up thinking I'm doing something wrong and I'm about to hit something.....
|
| 1st Jun 2013 10:13 pm |
|
|
Farmer Chalk
Member Since: 06 Mar 2013
Location: Independent Republic of Kentishshire.
Posts: 4197
|
Are they also dependant on steering wheel angle input? Still undecided whether I like them or not.... Sometimes as your reversing and your trying to fit in a gap they move unannounced and I find it most off putting? End up thinking I'm doing something wrong and I'm about to hit something.....
|
| 1st Jun 2013 10:14 pm |
|
|
