Member Since: 21 Jun 2008
Location: Brisbane
Posts: 355
Euro Style plates on Aust D4
The Aust version of The D4 has a mounting block on the tail gate that is designed for a conventional Aust sized number plate. Has anyone taken this off and put Euro styled plates on their D4 in Australia.
If so, how did you go mounting them on the back (ie taking off the mounting block) and do you have any pics to publicly show or PM me so I can see what it looks like?
I'm keen to get euro plates as thy are perfectly sized for the front but would need some work to get them to fit on the back.
Many thanks
Dan2012 MY13 SDV6 SE D4 Ipanema Sand with Almond leather
2012 TDI Passat - they reckon the DSG is crap, I reckon it's awesome
2010 MY11 Mitsubishi Challenger - Gone (it was a "Challenging Year")
2007 MY08 TDV6 SE - gone
3rd Aug 2013 10:36 pm
~Rich~
Member Since: 16 Mar 2009
Location: Sydney
Posts: 628
My D3 has had the block you are talking about taken off, there are normal mounting bolt fittings behind the block.
Take it off and have a look.2014 SDV6 HSE White, LLAMS Height Controller, Tinted Glass, Tuff Ant Sliders and 18" steel wheels, Safari Snorkel, Rhino Rack Platform, ARB Air Compressor, Custom Drawer and storage unit -http://www.box.com/s/jem0ilac3cner2mexq64 UHF CB, 4x4 Intellegence RWC, 120ltr Long range tank, Rock Sliders and Compressor protection plate Beanie grill, De Tango.
4th Aug 2013 5:47 am
Marmoset
Member Since: 28 May 2007
Location: Cheshire
Posts: 282
The plates used on the rear in the UK are actually square with 3 or four digits up top and 3 below, not sure what the rest of europe does.
Member Since: 03 Jan 2013
Location: Alland
Posts: 622
It seems to me that most D3/D4 is England have the square plate. Where i live in central europe, Austria and Germany use the same size as the front.
Im not sure about the block that you refer to, but to fit my plates they screw to the back tailgate. There is two small plastic plugs that are in the metal and the screws go into these,cannot see LR changing it for Australia.2015 D4 HSE LUX Kaikoura Stone(sold)
2010 D4 S Commercial Santorini Black(SWMBO)(sold)
2014 Evoque Dynamic Kaikoura Stone (sold)
2013 Porsche Boxster S (Fun car)
2008 D3 HSE Java Black(sold)
9th Aug 2013 8:54 pm
Dan W
Member Since: 21 Jun 2008
Location: Brisbane
Posts: 355
thanks for posting the pic Den. That's what I was keen to see. In Australia the standard issue plates are like this;
but you can get personalised plates in a Euro style like this;
And here is a side on of the rear of the disco. It's hard to see but there is a wedge shaped mounting block that is the same size as the standard issue plates;
2012 MY13 SDV6 SE D4 Ipanema Sand with Almond leather
2012 TDI Passat - they reckon the DSG is crap, I reckon it's awesome
2010 MY11 Mitsubishi Challenger - Gone (it was a "Challenging Year")
2007 MY08 TDV6 SE - gone
10th Aug 2013 7:14 am
den2013
Member Since: 03 Jan 2013
Location: Alland
Posts: 622
It seems as though all you need to do is take the number plate off and the holder. The wedge shape should be able to come off once you undo a couple of screws. The new plate holder will then screw on and insert the new number plate. 2015 D4 HSE LUX Kaikoura Stone(sold)
2010 D4 S Commercial Santorini Black(SWMBO)(sold)
2014 Evoque Dynamic Kaikoura Stone (sold)
2013 Porsche Boxster S (Fun car)
2008 D3 HSE Java Black(sold)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
