Member Since: 22 Jun 2011
Location: West Midlands
Posts: 1218
Trailer indicator
I have purchased a new Adria caravan when connected to my D4 the trailer indicator symbol on the dash isn’t showing any help is appreciated
2nd Jun 2024 1:40 pm
HairyFool
Member Since: 04 Jan 2023
Location: North Essex
Posts: 704
Can you tell if the tow socket wiring is Land Rover or 3rd party/self fitted? Look for part numbers or logo on any labels. Is it 13pin or dual 7 pin?
One which has been scotchlocked/bodged onto light clusters would not be sensed as the D4 has dedicated circuits and fuses for the trailer socket.A visitor from the dark side, my other vehicle is an is still an EV. Strictly speaking its SWMBO.
2nd Jun 2024 5:00 pm
stephenw46
Member Since: 22 Jun 2011
Location: West Midlands
Posts: 1218
It’s genuine 13 pin worked fine on previous caravan
2nd Jun 2024 5:04 pm
HairyFool
Member Since: 04 Jan 2023
Location: North Essex
Posts: 704
Which would indicate the load the van draws is insufficient to trigger the sensing of the lights so might need a supplimentary load device i.e. a resisitor for the dash light to activate.
You would just have to be careful where this is attached as the wiring is probably specced for LEDs, a test lamp crock clipped to the back of the plug would be safest to prove a point especially as you won't want to mod the van wiring at this stage.A visitor from the dark side, my other vehicle is an is still an EV. Strictly speaking its SWMBO.
2nd Jun 2024 7:41 pm
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4252
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
2nd Jun 2024 8:14 pm
HairyFool
Member Since: 04 Jan 2023
Location: North Essex
Posts: 704
I would prove where the problem lies before spending out. There are plenty of guides on line to fit load resisitors, the only issue rarely mentioned is where to fit them.
A 21w filament bulb will load the circuit as that the standard indicator lamp.A visitor from the dark side, my other vehicle is an is still an EV. Strictly speaking its SWMBO.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum