Markie
Member Since: 14 Aug 2018
Location: Cornwall
Posts: 10
|
Guys I'm really sorry to ask this question but I drive a Navara and have been given a V-Top webasto from a land rover, can I retro fit it to my motor? I have been reading this thread and looked at the photos to see if I can find wiring ideas, its been mentioned that one of the plugs has wires for the dosing pump, could you please let me know which colours these are? I do appreciate your help
|
 14th Aug 2018 4:05 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10764
  
|
does it look like the one in this thread?
Is your car diesel?
You will need a £40 jobbie off ebay to covert an electrical signal into a WBUS command to turn it on.
You will then also need a remote or timer to turn it on.
|
| 14th Aug 2018 4:31 pm |
|
|
Markie
Member Since: 14 Aug 2018
Location: Cornwall
Posts: 10
|
Yes I'm pretty sure thats the same as the one I have here, all the wiring and plugs look the same.
The truck is diesel too yes.
OK so what part am I looking for on the well known site? Also the pump wires are they the yellow/ white and yellow/blue?
I have ordered a remote, I am also looking at a dosing pump, I guess I need one to ensure the heater works whilst the engine is off?
Thanks again
|
| 15th Aug 2018 7:40 am |
|
|
Martin
Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
|
Pump 12V wire is pin 5 of the 8 pin connector, you need to ground the dosing pump's other pin.
WBUS control is done via pin 2 - you probably won't have this wire on your loom (link below to shop for pin)
Lots here: www.disco3.co.uk/fbh
Shop link for wiring parts: https://www.disco3.co.uk/shop/webasto-wiring-parts-c15.html 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
|
| 15th Aug 2018 8:41 am |
|
|
Markie
Member Since: 14 Aug 2018
Location: Cornwall
Posts: 10
|
Thanks Martin,
OK so I drive a Navara (sorry) but was given the V-Top from a friend who had to scrap his Discovery, I have been told on here that I need a £40 jobby from ebay to send a signal to start the webasto on the WBUS from the remote I have fitted, can you tell me what the jobby would be?
Thanks
Mark
|
| 15th Aug 2018 9:56 am |
|
|
Martin
Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
|
Can't recommend one sorry, I've not used one. 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
|
| 15th Aug 2018 10:20 am |
|
|
Markie
Member Since: 14 Aug 2018
Location: Cornwall
Posts: 10
|
OK not to worry, I will do some more research and see what I can find.
Thanks again
|
| 15th Aug 2018 10:21 am |
|
|
Martin
Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
|
Thread split out to a new one for you  06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
|
| 15th Aug 2018 10:21 am |
|
|
Martin
Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
|
Pretty sure it's been mentioned on here before so do a search here - try WBUS converter 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
|
| 15th Aug 2018 10:22 am |
|
|
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10764
|
Markie wrote:OK not to worry, I will do some more research and see what I can find.
Thanks again
Can't find it ATM. I'll try and see if they are forsale later.
They were forsale in Europe somewhere and are blue !
Could be out of season for them!
|
| 15th Aug 2018 11:12 am |
|
|
Markie
Member Since: 14 Aug 2018
Location: Cornwall
Posts: 10
|
Hey Pete,
Would this be the little guy I need? https://www.ebay.co.uk/itm/Analog-to-W-bus...%7Ciid%3A1
Hope so anyway as I have just ordered one
Thanks for your helps guys, it is very much appreciated, but do I need anything else now apart from a pump to make this amazing piece of kit work? Do I need the wires that Martin told me about earlier?
|
| 15th Aug 2018 11:17 am |
|
|
Markie
Member Since: 14 Aug 2018
Location: Cornwall
Posts: 10
|
Disco_Mikey wrote:I have a Webasto 1533 timer going spare 
YOu are a legend but I have ordered a remote, I hope it all works now after what its all cost me, one other question do i plumb it into the bottom radiator hose or try to plumb it into the heating system
|
| 15th Aug 2018 11:19 am |
|
|
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10764
|
Markie wrote:Hey Pete,
Would this be the little guy I need? https://www.ebay.co.uk/itm/Analog-to-W-bus...%7Ciid%3A1
Hope so anyway as I have just ordered one
Thanks for your helps guys, it is very much appreciated, but do I need anything else now apart from a pump to make this amazing piece of kit work? Do I need the wires that Martin told me about earlier?
Yes that is it
I guess it depends what you are trying to heat. We don't know the nevarda's colling system on here.
But connecting it to the pipes that go to the heater matrix inside seams a sensible way forward as this should heat the matrix and engine
|
| 15th Aug 2018 11:41 am |
|
|
