| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
thommo1927
Member Since: 30 Sep 2016
Location: Cardiff South Wales
Posts: 415
  
|
On tickover I get an annoying vibration through the bonnet ,If I give it a tap it’ll stop. But soon come back ,Can I adjust it ? 
|
 12th Dec 2017 6:25 pm |
|
|
Hardware
Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 12697
  
|
too chuffin' cold for me to check the D4 but the D1 I had had rubber bits that could be screwed in/out that the bonnet front corners sat on.
if you have them, try winding them out a bit so bonnet is pressing harder on them when shut.
|
| 12th Dec 2017 6:50 pm |
|
|
thommo1927
Member Since: 30 Sep 2016
Location: Cardiff South Wales
Posts: 415
|
Cheers Hardware ,I had 2 Discovery’s before this one. 200 tdi & 300 tdi. Miss them both. I’ll check the bonnet later when the baby is sleeping and I’m out walking the dog.
|
| 12th Dec 2017 7:12 pm |
|
|
ruben
D3 Decade
Member Since: 26 Sep 2006
Location: ASTURIAS
Posts: 2382
|
you will see that..YES he have them!! and is a very simple sistem but work very well!! lost in translation!
|
| 12th Dec 2017 10:44 pm |
|
|
DigitalJunior
Member Since: 22 Nov 2008
Location: Cumbria
Posts: 4398
|
Also try lifting each corner of the bonnet up - a seized bonnet catch is quite common but can be free'd by cleaning and WD40
|
| 13th Dec 2017 12:04 am |
|
|
Danish
Member Since: 13 Jul 2016
Location: Manchester
Posts: 134
 
|
thommo1927 wrote:On tickover I get an annoying vibration through the bonnet ,If I give it a tap it’ll stop. But soon come back ,Can I adjust it ?
Under each corner of the bonnet theres rubber stoppers that screw out to stop the vibration.
Make sure the bonnet still latches closed afterwards though otherwise you've done it to much. D4 HSE
D3 HSE
D2 ex police upgraded to HSE
P38
|
| 13th Dec 2017 10:27 pm |
|
|
thommo1927
Member Since: 30 Sep 2016
Location: Cardiff South Wales
Posts: 415
|
Thanks guys ,Unscrewed the stoppers a bit .No more annoying vibrating bonnet
|
| 16th Dec 2017 1:33 pm |
|
|
DN
D3 Decade
Member Since: 24 Jun 2006
Location: W.London.
Posts: 2293
 
|
It's odd that this has cropped up just as I have begun to notice a kind of hollow drumming noise on mine. Will try adjusting the bonnet stoppers also. D3 owned from new, P017 brake recall, BAS FBHIC, new FBH, LR013487 oil pump, new water pump. RRS front lower suspension arms. New suspension compressor/ relay. New Denso alternator. CuNifer rear brake pipes. New GKN rear propshaft. New HPFP belt & tensioner. New A/C Condenser.NO WARRANTY for many many years.
|
| 16th Dec 2017 1:56 pm |
|
|
DN
D3 Decade
Member Since: 24 Jun 2006
Location: W.London.
Posts: 2293
|
Found the culprit at last  ...........Nothing to do with the bonnet on mine, it appears that the steel panel below my newly replaced aux belt tensioner, was not fully secured. In fact when I tried to tighten the front bolts I found that one of the weedy M6 captive nuts above had broken. Captive nuts and front bolts replaced with beefier ones (M8 suspension compressor type). Solid now, and no drumming noise.  D3 owned from new, P017 brake recall, BAS FBHIC, new FBH, LR013487 oil pump, new water pump. RRS front lower suspension arms. New suspension compressor/ relay. New Denso alternator. CuNifer rear brake pipes. New GKN rear propshaft. New HPFP belt & tensioner. New A/C Condenser.NO WARRANTY for many many years.
|
| 6th Jul 2018 5:09 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
