Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
Vive la difference
nope, it's not in the wrong regional section....
Had a look at Viper's gallery ( http://www.disco3.co.uk/gallery/index.php?cat=10299 )
The rear mudflaps look a lot better than the puny UK ones and there appears to be headlight protection lenses fitted (complete with a little LR oval) are these standard in Oz? or are they accessories? .... if so.... what are the part numbers....
Cheers,
10forcash
31st Oct 2005 4:23 pm
simon
Member Since: 11 Jan 2005
Location: Shropshire
Posts: 18296
Those flaps look like mine... I think its the dirt accentuating the angles on the plastic... could be wrong though.
Oooh I want those headlight covers !
They do these for Freelander including a pair for use abroad with the dark bits already applied. Very handy, less hassle than either sticky stuff or taking out the damn headlights to flick a switch... and then not really knowing if the lever has flicked properly.
Maybe they just added these to the accessories list ?
31st Oct 2005 5:07 pm
Nickhearne
Member Since: 28 May 2005
Location: Ibstone Bucks
Posts: 999
No I'm with 10 on this one thy look like they have a extra section added to make them wider!
D5 HSE Waitona Grey 2015
Range Rover Sport Estate 2.0 P400e Hse Dynamic Black
D4 HSE Santorini Black
Almond Arabica hide & Walnut trim Now sold
Discovery 3 TDV6 SE
Zambezi Silver Ebony leather Now sold
Have a look closely at one of the larger gallery pictures, there's definitely an extra bit on there. But it doesn't look any more flexible than the rest and if so it's probably even more likely to get ripped off!
Formula 4x4 do similar headlight protectors but I doubt they'll fit as well as the LR ones. Need to get the part number for them!The End
31st Oct 2005 5:26 pm
simon
Member Since: 11 Jan 2005
Location: Shropshire
Posts: 18296
Nickhearne wrote:
No I'm with 10 on this one thy look like they have a extra section added to make them wider!
mmm now I see what you mean... missed that photo.
Agree... less spray to others but more expensive as they WILL get knocked off.
31st Oct 2005 5:35 pm
anthill
Member Since: 22 Jul 2005
Location: Busselton
Posts: 57
Slimer wrote:
Have a look closely at one of the larger gallery pictures, there's definitely an extra bit on there. But it doesn't look any more flexible than the rest and if so it's probably even more likely to get ripped off!
Formula 4x4 do similar headlight protectors but I doubt they'll fit as well as the LR ones. Need to get the part number for them!
I just had to go out and look at my rear mudflaps.
They are the same as in the photo, the extra bit is not an extra bit but is all part of the mudflap (one moulding). These must be the standard flaps on the Ausie spec. They are quite flexible..
I will be contacting the LR dealer about the headlamp protectors tomorrow, they were not available when I bought my D3...TDV6 SE (Ausie Spec) COOOL Chawton White.
1st Nov 2005 1:23 pm
BN
Member Since: 18 Mar 2005
Location: Here
Posts: 6463
anthill wrote:
Slimer wrote:
Have a look closely at one of the larger gallery pictures, there's definitely an extra bit on there. But it doesn't look any more flexible than the rest and if so it's probably even more likely to get ripped off!
Formula 4x4 do similar headlight protectors but I doubt they'll fit as well as the LR ones. Need to get the part number for them!
I just had to go out and look at my rear mudflaps.
They are the same as in the photo, the extra bit is not an extra bit but is all part of the mudflap (one moulding). These must be the standard flaps on the Ausie spec. They are quite flexible..
I will be contacting the LR dealer about the headlamp protectors tomorrow, they were not available when I bought my D3...
I think they are dust deflection, where we do not have that problem in the UK. Similar to the dirt bikes in the stadiums, to keep the dust low.
1st Nov 2005 2:17 pm
anthill
Member Since: 22 Jul 2005
Location: Busselton
Posts: 57
BN wrote:
anthill wrote:
Slimer wrote:
Have a look closely at one of the larger gallery pictures, there's definitely an extra bit on there. But it doesn't look any more flexible than the rest and if so it's probably even more likely to get ripped off!
Formula 4x4 do similar headlight protectors but I doubt they'll fit as well as the LR ones. Need to get the part number for them!
I just had to go out and look at my rear mudflaps.
They are the same as in the photo, the extra bit is not an extra bit but is all part of the mudflap (one moulding). These must be the standard flaps on the Ausie spec. They are quite flexible..
I will be contacting the LR dealer about the headlamp protectors tomorrow, they were not available when I bought my D3...
I think they are dust deflection, where we do not have that problem in the UK. Similar to the dirt bikes in the stadiums, to keep the dust low.
If they are dust deflectors I don't know where they deflect the dust to as the clouds of dust when driving on dirt roads is just as bad as my TD5. I took some close up pics of the mudlaps but have forgotten how to get them into the gallery.
The headlamp protectors are made in Australia for Land Rover Australia, I have been quoted A$98 (about GBP40) for a pair from my Land Rover dealer. Cheap insurance I thinks....TDV6 SE (Ausie Spec) COOOL Chawton White.
The headlamp protectors are made in Australia for Land Rover Australia, I have been quoted A$98 (about GBP40) for a pair from my Land Rover dealer. Cheap insurance I thinks....
Sounds good, what would it cost to ship a batch to the UK?The End
Have a look closely at one of the larger gallery pictures, there's definitely an extra bit on there. But it doesn't look any more flexible than the rest and if so it's probably even more likely to get ripped off!
Formula 4x4 do similar headlight protectors but I doubt they'll fit as well as the LR ones. Need to get the part number for them!
I just had to go out and look at my rear mudflaps.
They are the same as in the photo, the extra bit is not an extra bit but is all part of the mudflap (one moulding). These must be the standard flaps on the Ausie spec. They are quite flexible..
I will be contacting the LR dealer about the headlamp protectors tomorrow, they were not available when I bought my D3...
Those mud flaps are not very flexible in my opinion I have purchase 4 brand new ones to replace all of my 4 cracked ones. The part number for the rear ones are CAT500103PCL (Right Rear) & CAT500113PCL (Left Rear). The front ones area aset of two - CAT500010PCL. The stickers on the boxes state Made in the UK so I suppose our UK counterparts can get the same mudflaps us Aussies get.
I'm going to get a set of front light protectors for sure. Just a note about the manufactuer of these. It is likely that they are Australian made. There is a company which specialises in headlamp covers for many makes of cars in Australia and these come with the manufacturer's logo printed on them.
Chris2011 Discovery 4 (MY12) SDV6 HSE with General Grabber AT's, Traxide Aux Battery system, custom rear drawers and Autosafe half height cargo barrier
Gone - 2005 Discovery 3 TDV6 HSE
ARB Bull Bar, Warn 9.5XP Winch, IPF D/Lights, Cooper STT's, LR Raised Air Intake, Traxide aux battery system, custom drawers and half height Autosafe cargo barrier, Mitchell Bros 4x4 tow hitch
2nd Nov 2005 10:22 am
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
Great, thanks for the info
If you find anything more on the light protectors (even a dealer contact address) could you let us know?
Cheers,
10forcash
2nd Nov 2005 10:27 am
simon
Member Since: 11 Jan 2005
Location: Shropshire
Posts: 18296
Ditto... if available to buy I want a set... and do they do a set for driving in Europe with the blanks already imprinted on them ?
Would be damn useful
-s
2nd Nov 2005 12:23 pm
BN
Member Since: 18 Mar 2005
Location: Here
Posts: 6463
EGR
I think you will find they are made by EGR of Australia
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
I took some close up pics of the mudlaps but have forgotten how to get them into the gallery.
I have purchase 4 brand new ones to replace all of my 4 cracked ones. The part number for the rear ones are CAT500103PCL (Right Rear) & CAT500113PCL (Left Rear). The front ones area aset of two - CAT500010PCL. The stickers on the boxes state Made in the UK so I suppose our UK counterparts can get the same mudflaps us Aussies get.
