Member Since: 21 Oct 2016
Location: kent
Posts: 14138
[Wanted] A bar brackets
Hiya
Wondering on the off chance if anyone May have some of these brackets plse
They fit onto the front impact bar to mount a nudge bar
Would be extremely grateful plse and of course goes without question of me covering what u want for them plus postage costs
Thks so much in advance
( Pic of brackets and type of A bar that the brackets fit onto )
5th Sep 2020 5:31 am
Andy Foster
Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551
Maybe someone could knock a pair up for you if you have the dimensions.
AndyD4 MY15 SE TECH
D3 gone but never forgotten.
11th Sep 2020 8:57 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14138
Hi andy
funny enough have been in contact with a company in Poland , to see if the brackets there selling will match up, was just on the off chance from ebay PL , so waiting
Wondered that as well of having them made up, @emmet very kindly sent me all the dimensions
don’t know how expensive it would be, also don’t know any companies that would do them
Thks again
Ps, Disco goes in on the 15 th to have mot, brake hoses, inc brake fluid change , AC recharge and a few other bits so it’s d
11th Sep 2020 9:26 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14138
Hi
Wished to give this a bump plse
Got some quotes to have these made up and nearly needed smelling salts , so was wondering if anyone may have or seen these brackets plse
Bigger pic showing the nuts being angled
Many thks as always in advance and would be extremely grateful plse
Dimensions kindly done by @Andy , many thks once again
Gary
Angle of welded nuts are roughly 20 x 30 degrees
Click image to enlarge
Click image to enlarge
28th Sep 2020 8:16 am
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4244
Scubble suggested you try these guys if you haven't already
https://www.flatdoguk.com/I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
28th Sep 2020 8:26 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14138
Hi nige
Many thks, tried them but alas no good I’m afraid , they just sell the top ones
As always most appreciated
28th Sep 2020 8:54 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14138
Also found another pic of them , can see now why there angled because of the slope of the impact bar
Ryan Wild also does some fabrication stuff ... he makes e.g. headlamp anti-theft brackets. don't know if he makes anything this hefty though.
think his username is RWild1 or similar.
28th Sep 2020 4:35 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14138
Hiya
Bless u for that and will check it out
Thks so much and very grateful for the heads up, alas they're like rocket horse
29th Sep 2020 1:51 pm
MikeMorris
Member Since: 19 Dec 2017
Location: Swindon
Posts: 16
Hi
I have a shop with turning, milling & a bit of surface grinding + mig, tig & gas welding.
If you get stuck let me know.
Will need more details - I didnt see the thickness & also thread inside the nuts ( did I miss them?)
I am semi retired so turn round of job would be quick. Price will be good.
Br MikeTurning, milling, grinding & welding
29th Sep 2020 8:41 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14138
Hi mike
Thks so much for getting in touch and the awesome offer
Funny enough a forum member has been in touch ref making the brackets , always the way
Bless u once again but looks I’m set thank u so much
As a side note and out of interest , have a front impact bar so will have to sit down and try and work out the exact angle of the welded nuts
@Andy from here kindly gave me the dimensions etc, alas I’m laid up yet again at the moment with my back but as soon as I can will sit down and try and work it out
This is what was kindly sent over to me, so hopefully will help others in the future
Thks so much once again
Note
Click image to enlarge
30th Sep 2020 8:11 am
MikeMorris
Member Since: 19 Dec 2017
Location: Swindon
Posts: 16
Sounds like you are sorted - at least with your car. Backs can be another story - good luck & quick recovery.
You know where I am - offer still stands.
Br MikeTurning, milling, grinding & welding
30th Sep 2020 8:21 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14138
Thks so much mike once again , am very grateful to u
Worst part is I was just getting back on my feet after falling over a wheel rim, yeh i know then this time all it took was getting out of bed one morning
So back to bed rest, thk god there’s Netflix
Thks again
Ps, maybe I should have got the forum to have done my back the first time round
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
, so was wondering if anyone may have or seen these brackets plse
