garnerj
Member Since: 21 Nov 2018
Location: Milton keynes
Posts: 145
  
|
| [Wanted] Inlet manifold injector spacers/collars |
|
So, like a complete idiot when taking off my inlet manifold I heard something fall out and drop down the front of the engine bay. I thought it was a bolt but no! So, on the way to putting it back in I realised that in the cover where the bolts for the injectors go there is a little rubber/metal collar, mits of which were still there but I’m missing a couple. Was actually missing three but found one on the undertray. Despite several hours of hunting for them I can’t find them for love nor money.
So, don’t suppose anyone happens to know if you can get them separately rather than buying a whole cover? Or better still, anyone got any lying around they would be prepared to part with.
TIA
Jon 2008 Disco3 2.7 Tdv6 HSE
2011 L322 Range Rover 4.4 Tdv8 Vogue SE
2002 P38 Range Rover 4.6 V8 Vogue Se
|
 31st Dec 2020 10:57 am |
|
|
Kilovolt
Member Since: 29 Jun 2015
Location: South Derbyshire
Posts: 1071
|
Might not be much help, but having dropped items from engine rebuilds (onto the floor and undertray), I have had a fish about with a magnetic inspection light and on many occasions found an item I could not physically see.
Maybe sweep the ground and engine bay with a similar approach.
Just a thought. "Track day running - Don't put your foot back on the accelerator until your absolutely sure you don't have to take it off again"
Current Ride: D4 XS Commercial Baltic Blue SDV6 fully loaded with heated everything 
Track Days: BMW E36 M3 Evolution MY 1996 (3.2 Litre 377 BHP sat in 1,250 Kgs of car, with a pro safety cage and some serious braking power)
|
| 31st Dec 2020 11:01 am |
|
|
garnerj
Member Since: 21 Nov 2018
Location: Milton keynes
Posts: 145
|
A valid thought, I have had a try with my magnet but are going to do the same again when I pull the car onto the trailer later as well. Not holding out much hope as the hinder trays are off and it’s def not on the floor. If I didn’t know better I would say that it wasn’t there to begin with but the cover was way too clean for that to be the case! 2008 Disco3 2.7 Tdv6 HSE
2011 L322 Range Rover 4.4 Tdv8 Vogue SE
2002 P38 Range Rover 4.6 V8 Vogue Se
|
| 31st Dec 2020 11:04 am |
|
|
