Member Since: 23 Aug 2015
Location: nairobi
Posts: 286
Water pump
Few months ago noticed a loss of coolant from the water pump as it fits in the block. I’ve changed the o ring and after a while it leaked again. Second time change of o ring again after some leaked again. Now third time bought new pump, new o ring fitted and in a week boom again leaking.
Yes I have cleaned the mating surfaces. The only thing I haven’t done is tight the bolts to 10nm as per manual. Not super tight but also not 10.
Are you sure its the pump, It could be the top hose abobe in the center of the engine, if that leaks it tracks down to the pump making it look like the pump is leaking.
Flack
30th Aug 2019 9:31 am
KostasA
Member Since: 23 Aug 2015
Location: nairobi
Posts: 286
you are so correct.. it was the bleeding screw..... Thanks a million Flack.
30th Aug 2019 8:28 pm
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1783
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum