Member Since: 21 Sep 2011
Location: istanbul
Posts: 54
Webasto got cleaned. still don't work.
Hi guys,
I'm having issues with my FBH on my TDV6. It used to not work at al and only ticked for few seconds and stop. It seems to be in locked when diagnosed. After clearing the faults and taking the unit apart and cleaning inside it still don't start. I have the oval timer but it won't start timed nor in auto mode. There is the whirr noise. Any ideas?
Ps: All seven criterias are met for the auto oprartion.
Click image to enlarge
[/img]2005 Disco 3 TDV6 HSE, 2.5" Johnson Rods lift kit, 265/70R17 Mickey Thompson MTZ tires, Heavy Duty front axles, 12.000 lbs discrete mounted winch, Mantec Sump guard, LR Raised Air intake, Albrecht 6890 CB Radio, Superchips ECU remapped, Sprint Booster Throttle Response, K&N air filter, Waeco fridge, 42" & 23" LED bars, Britpart rock sliders....
28th Dec 2018 4:51 pm
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
Try forcing air through the inlet to aid start up, has worked well for many owners.Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
28th Dec 2018 7:15 pm
irimi
Member Since: 21 Sep 2011
Location: istanbul
Posts: 54
Okay, will try as soon as possible. It did start today I could feel the warm (not hot at all) exhaust output with my hand but didn't really work.2005 Disco 3 TDV6 HSE, 2.5" Johnson Rods lift kit, 265/70R17 Mickey Thompson MTZ tires, Heavy Duty front axles, 12.000 lbs discrete mounted winch, Mantec Sump guard, LR Raised Air intake, Albrecht 6890 CB Radio, Superchips ECU remapped, Sprint Booster Throttle Response, K&N air filter, Waeco fridge, 42" & 23" LED bars, Britpart rock sliders....
28th Dec 2018 7:44 pm
irimi
Member Since: 21 Sep 2011
Location: istanbul
Posts: 54
Narpy wrote:
Try forcing air through the inlet to aid start up, has worked well for many owners.
Forced air didn't work. The unit starts and whirs for a minute then stops. I can feel the forced air coming through the exhaust. Maybe it's got something to do with the ambient temp sensor? Thank you for the tip though 2005 Disco 3 TDV6 HSE, 2.5" Johnson Rods lift kit, 265/70R17 Mickey Thompson MTZ tires, Heavy Duty front axles, 12.000 lbs discrete mounted winch, Mantec Sump guard, LR Raised Air intake, Albrecht 6890 CB Radio, Superchips ECU remapped, Sprint Booster Throttle Response, K&N air filter, Waeco fridge, 42" & 23" LED bars, Britpart rock sliders....
29th Dec 2018 11:03 am
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
If it initially runs, forcing air thru it should get it running.
Keep trying, my own took about 20 attempts and got further each time until it eventually spluttered into life and ran normally.
Patience is the key. Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
29th Dec 2018 11:37 am
irimi
Member Since: 21 Sep 2011
Location: istanbul
Posts: 54
Ahhh okay. I only tried once. I'll keep trying tomorrow early in the morning when it's really cold. I just ordered VAG COM cable and downloaded the Webasto Thermo Test SW. The cable should arrive on 3rd of Jan.2005 Disco 3 TDV6 HSE, 2.5" Johnson Rods lift kit, 265/70R17 Mickey Thompson MTZ tires, Heavy Duty front axles, 12.000 lbs discrete mounted winch, Mantec Sump guard, LR Raised Air intake, Albrecht 6890 CB Radio, Superchips ECU remapped, Sprint Booster Throttle Response, K&N air filter, Waeco fridge, 42" & 23" LED bars, Britpart rock sliders....
29th Dec 2018 11:59 am
irimi
Member Since: 21 Sep 2011
Location: istanbul
Posts: 54
A month later..
I tried almost everything and now I think the glow plug is no more.
I built a diagnostics cable and I'm able to reach the unit. When normal operation it locks it self out. With the WTT software I was able to test the unit and the pumps turned out okay when the glow plug reaches %1.5 it creates a fault and stops.
Attached are the test screen shot and the faults.
Click image to enlarge
Click image to enlarge
2005 Disco 3 TDV6 HSE, 2.5" Johnson Rods lift kit, 265/70R17 Mickey Thompson MTZ tires, Heavy Duty front axles, 12.000 lbs discrete mounted winch, Mantec Sump guard, LR Raised Air intake, Albrecht 6890 CB Radio, Superchips ECU remapped, Sprint Booster Throttle Response, K&N air filter, Waeco fridge, 42" & 23" LED bars, Britpart rock sliders....
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
