Member Since: 25 Sep 2021
Location: Peterborough
Posts: 59
What’s this random cable?
I thought I might start a new game for Christmas. “What’s this random cable for?”
Started trying to sort my EPB. First real job on the disco, so starting to get to places I hadn’t previously seen.
Pic 1 - random connector at the battery (and what looks like an after market connection to the battery
Pic 2, above the spare wheel. This oval shaped plastic was just lying loose, and has an electrical connector to it (which is all that’s stopping it disappearing)
Any help would be gratefully receivedDisco 4 2012 HSE, Nara Bronze
Gone but not forgotten
2007 FreeL2 XS, Stornoway Grey
18th Dec 2022 10:17 am
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20842
One under the bonnet is for the transit relay, no longer required
Member Since: 25 Sep 2021
Location: Peterborough
Posts: 59
Ahhh, less of a challenge than I thought 🤣🤣
Should the tpms sensor be screwed down? Or is it meant to just flap around?Disco 4 2012 HSE, Nara Bronze
Gone but not forgotten
2007 FreeL2 XS, Stornoway Grey
18th Dec 2022 12:54 pm
Flatlander
Member Since: 20 Jul 2015
Location: Here
Posts: 575
It's not a receiver it's an initiator, there are four, one in each wheelarch. The spare doesn't require one.
The TPMS receiver is in the control module. if it's not connected to anything it's likely a 'spare' left there from build, if it is connected, then there should be two plastic rivets holding it to the wheelarch liner.
18th Dec 2022 1:40 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20842
The above is correct. I've always called it a receiver as its easier to explain My D3 Build Thread
The aftermarket connection to the battery may well be the power supply lead to the Battery Monitoring Sensor which is attached to the battery negative terminal.1972 Range Rover Classic 2 door V8
2013 Land Rover Discovery 4 HSE - SCRAPPED
2016 Land Rover Discovery 4 Landmark
2022 Volvo XC40 T5 PHEV 282HP FWD 3 cylinder!
18th Dec 2022 2:34 pm
Shamrock
Member Since: 16 Jun 2022
Location: South Kerry
Posts: 114
Not at all.
The BMS connector you're talking is on the negative end of the battery with wires blue and brown.
The other one is around the other end (+) with wires green and black. This connector is not aftermarket but genuine and designed to connect to the "transit relay" (YWN500140), an orange block that is removed by the dealers when cars are delivered. Some explications here : https://landroverforums.com/forum/general-...lr4-82292/.
Thanks a lot to all on this forum that make me learn more and more about my car everyday !
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
