PCT3
Member Since: 13 May 2017
Location: Kent
Posts: 144
  
|
Not having access to laths and things like that, i tried another option which works for me.
I had to replace my wheel nuts due to corrosion under the chrome cover, I used 2 of the old nuts cut the cover off found a bolt that fitted the threads in the nuts cut the head off the bolt threaded into nut then shank sticking out fitted to an old drill.
Run up the drill and used a grinder to grind down bolt flange, this leaves a good fitting socket that screws onto the wheel studs making wheel installation nice and easy, if you fit 3 nuts and pinch up lightly your new locators un screw by hand allowing you to fit the remaining nuts Discovery 3 HSE 07
Discovery 1, Search & Rescue SE4x4 Responce
Fiat Decato motor home
Mazda MX5
|
 12th May 2022 1:18 pm |
|
|
kevofcov
Member Since: 06 Nov 2007
Location: Other end of M69
Posts: 572
 
|
edit
|
| 15th May 2022 3:05 pm |
|
|
