DG
Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50934
|
Farmer Chalk wrote:Don’t worry… if they beat you up you’ve always got insurance! 
Bit slow tonight DG…feeling ok?
no ...just got in from central Smoke ...left the motor unlocked all day but no one stole it  21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
|
 8th Feb 2022 10:04 pm |
|
|
Hardware
Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 12708
  
|
Are you in a D5 today then?  .
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer  ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
|
| 8th Feb 2022 10:06 pm |
|
|
DG
Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50934
|
No ..DS ...with UWB 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
|
| 8th Feb 2022 10:08 pm |
|
|
craigside
Member Since: 10 Mar 2011
Location: Bolton
Posts: 41
|
I've just managed to turn off Keyless Entry which has worked a treat!
Next thing I just need any advice on how to unclip the OBD socket to pop it out? I've got an anti-theft OBD to fit but am unsure on getting the original out of its 'bracket'? Rob
'65 Reliant Regal, '69 Imp, Fiat Amigo 600cc Camper, Triumph GT6 Mk1, MG Midget, Escort Van, Triumph Spitfire 1.5 Mk3, Escort Mk3, Bluebird 2.0, Bluebird 1.8 Turbo, Supra 3L Turbo, Previa (kids arrived!), CLK 320, CLK 500, A4 3.0 Cab.
Since 02/11 - '06 D3 HSE Zermatt Silver | Egr blanked |
Since 03/18 - '15 D4 HSE Grey
|
| 21st Feb 2022 6:18 pm |
|
|
Farmer Chalk
Member Since: 07 Mar 2013
Location: Independent Republic of Kentishshire.
Posts: 4156
  
|
If you look at the one you are replacing it with you will see that there are two little prongs at each end. These are a push fit and click in place in the original hole. Thus if you use a small pick or thin screwdriver you can push these prongs in and using slightly pressure wiggle the original out…
I can take a photo tomorrow if that helps?
|
| 21st Feb 2022 6:35 pm |
|
|
Gary_P
Member Since: 03 May 2016
Location: Kent
Posts: 1521
 
|
I'd be interested in a photo. Thanks Gary
-------------------------------------------
Discovery 4 HSE 2016MY
|
| 22nd Feb 2022 12:48 am |
|
|
