| Search results - "Rover" |
Thread upload24 viewsImage uploaded in new thread
|
|
0000 LR Bluetooth dealer Kit install instructions1610 viewsThis 17 page pdf is mostly a series of pictures showing how to install the original Land Rover dealer installed Bluetooth kit for circa 2005 / 2006 three's. Also included are three wiring diagrams sheets related to the pairing code 0000 Bluetooth install.
This pdf is useful if you are now removing the 0000 kit to install the optical 2121 MOST D4 module, an easier install than the 0000 kit ever was.
|
|
Thread upload24 viewsImage uploaded in thread 171337
|
|
Thread upload10 viewsImage uploaded in thread 171337
|
|
Thread upload10 viewsImage uploaded in thread 171337
|
|
CALENDAR ENTRY 20091191 viewsBonatti grey TDV6 S, ambulance conversion, MTR's, winch, RAI, safety devices roof rack, rear ladder, bash plate, warn lighting, LED lighting throughout.
Owned by me, Rich Bell, Director of Extreme Medical Ltd, providers of medical support to Land Rover events.
|
|
Thread upload4 viewsImage uploaded in new thread
|
|
201 views
|
|
Thread upload2 viewsImage uploaded in new thread
|
|
Thread upload2 viewsImage uploaded in new thread
|
|
185 views
|
|
Thankfully it\'s nearly a week old. they wanted to dig underneath my drive to install gas. Nov 5th, Bang,78 viewsNo, and i was worried about the rangerover!
|
|
Thread upload3 viewsImage uploaded in new thread
|
|
2349 views
|
|
2320 views
|
|
Thread upload3 viewsImage uploaded in new thread
|
|
252 viewsSilverstone weekend again. My other club (RRR Ltd) do courtesy rides to raise money for charity plus we all enjoy ourselves. After 7 Range Rovers this is my first Discovery.
|
|
431 views
|
|
163 views
|
|
Thread upload13 viewsImage uploaded in thread 149931
|
|
Thread upload11 viewsImage uploaded in thread 149931
|
|
11 Lesson in removing a jammed brake assembly in the Outback378 viewsSpent the next 4 hours doing this to my D3. Gave the photos to Land Rover dealer and they did not think this constituted abuse of the vehicle. I thought that was charitable, but if we hadn\'t done this, the tow back to civilisation would have been even longer.
|
|
Kuwait Land Rover277 views
|
|
Muddy LR3 at US SUV of the Year Awards3659 views
|
|
Thread upload1 viewsImage uploaded in thread 5
|
|
264 viewsland rover experience scotland
|
|
317 viewsland rover experience scotland
|
|
300 viewsland rover experience scotland
|
|
270 viewsland rover experience scotland
|
|
325 viewsland rover experience scotland
|
|
401 viewsland rover experience scotland
|
|
super extended mode166 views
|
|
Thread upload21 viewsImage uploaded in thread 172546
|
|
57 viewsSlight damage to rear window tint, the garage I bought it from "removed" the landrover garage sticker and damaged the tint!
|
|
Thread upload18 viewsImage uploaded in thread 161056
|
|
Border Rover in Boughrood,what can i say,It was an Amazing Weekend.51 views
|
|
10 views
|
|
Thread upload2 viewsImage uploaded in thread 5
|
|
Range Rover upside down on D3 event day 18th September423 views
|
|
Land Rover Club jacket 2014139 views
|
|
Thread upload7 viewsImage uploaded in new thread
|
|
Thread upload18 viewsImage uploaded in thread 157551
|
|
Thread upload8 viewsImage uploaded in thread 150558
|
|
The old girl140 views
|
|
Northumberland National Park Mountain Rescue Team Land Rover Defender 11024 views
|
|
D4 HSE352 viewsLand Rover Discovery D4 HSE MY2012
|
|
Land Rover Defender 50th Anniversary 15 views
|
|
Land Rover Defender 11023 views
|
|
D4 HSE219 viewsLand Rover Discovery D4 HSE MY2012
|
|
The Northumberland National Park Mountain Rescue Team Land Rover13 views
|
|
Land Rover Defender 50th Anniversary 18 views
|
|
D4 HSE258 viewsLand Rover Discovery D4 HSE MY2012
|
|
Land Rover Defender 50th Anniversary 18 views
|
|
D4 HSE206 viewsLand Rover Discovery D4 HSE MY2012
|
|
D4 HSE215 viewsLand Rover Discovery D4 HSE MY2012
|
|
Northumberland National Park Mountain Rescue Team Land Rover20 views
|
|
Thread upload1 viewsImage uploaded in thread 5
|
|
0 viewsMy 1st Land Rover 4x4 Off Roader
|
|
Thread upload19 viewsImage uploaded in thread 159335
|
|
Thread upload9 viewsImage uploaded in new thread
|
|
Thread upload12 viewsImage uploaded in thread 79090
|
|
Thread upload15 viewsImage uploaded in new thread
|
|
Thread upload15 viewsImage uploaded in thread 79090
|
|
811 views
|
|
Land Rover splash logo2827 views
|
|
Thread upload0 viewsImage uploaded in thread 204149
|
|
Thread upload1 viewsImage uploaded in thread 204149
|
|
89 views
|
|
114 views
|
|
Thread upload65 viewsImage uploaded in new thread
|
|
Thread upload16 viewsImage uploaded in thread 155074
|
|
120 views
|
|
Thread upload16 viewsImage uploaded in thread 195276
|
|
Range Rover Evoques42 views
|
|
Thread upload26 viewsImage uploaded in thread 155077
|
|
New Range Rover29 views
|
|
Thread upload25 viewsImage uploaded in thread 150228
|
|
76 views
|
|
Set tappetini Land Rover per Discovery 3/4.19 viewsSet tappetini Land Rover per Discovery 3/4.
|
|
Chinese touchscreen + GPS + USB reader + Bluetooth + DVD32 viewstrying to install this touchscreen
|
|
ta-dah! the final result36 viewscomplete GPS satNav system, with iGO software and ALL maps from europe 2012, including POIs speedcams, and personalized land rover skins
|
|
65 views
|
|
Thread upload2 viewsImage uploaded in thread 71927
|
|
Thread upload4 viewsImage uploaded in thread 71927
|
|
Thread upload13 viewsImage uploaded in thread 147037
|
|
Thread upload33 viewsImage uploaded in new thread
|
|
![2014-land-rover-range-rover-sport-spy-shots_100396530_l[1].jpg](albums/userpics/28662/thumb_2014-land-rover-range-rover-sport-spy-shots_100396530_l%5B1%5D.jpg "Filename=2014-land-rover-range-rover-sport-spy-shots_100396530_l[1].jpg
Filesize=133KB
Dimensions=1024x609
Date added=20.Dec 2012")
33 views
|
|
The Northumberland National Park Mountain Rescue Team Land Rover13 viewsDelta Defender
|
|
Thread upload16 viewsImage uploaded in thread 115513
|
|
Thread upload18 viewsImage uploaded in thread 115513
|
|
Thread upload12 viewsImage uploaded in new thread
|
|
Thread upload18 viewsImage uploaded in thread 152884
|
|
Thread upload18 viewsImage uploaded in thread 152884
|
|
Thread upload22 viewsImage uploaded in thread 152884
|
|
Thread upload13 viewsImage uploaded in thread 128561
|
|
Thread upload30 viewsImage uploaded in thread 160792
|
|
Thread upload18 viewsImage uploaded in thread 110148
|
|
Rhino Hitch429 viewsCover fitted over the 75A Anderson plug with Rhino Hitch fitted which is a Class IV hitch. https://www.facebook.com/DifferentialPartsUS
Fits the Disco 3, Disco 4 and Range Rover Sport
|
|
Victory Cup Polo Match141 viewsVictory Cup Bi Plane Polo Match2 viewsLand Rover event at Victory Cup Polo match 10/17/15. http://victorycup.org/bootsandpearls/
VIP Section by Texas Rovers and Land Rover Austin http://texasrovers.org and http://landroveraustin.com/ https://www.facebook.com/DifferentialPartsUS https://www.facebook.com/snomasterusa
https://www.facebook.com/DifferentialPartsUS
|
|
Victory Cup Bi Plane Polo Match121 viewsLand Rover event at Victory Cup Polo match 10/17/15. http://victorycup.org/bootsandpearls/
VIP Section by Texas Rovers and Land Rover Austin http://texasrovers.org and http://landroveraustin.com/ https://www.facebook.com/DifferentialPartsUS
https://www.facebook.com/DifferentialPartsUS
|
|
Thread upload30 viewsImage uploaded in thread 136123
|
|
Thread upload21 viewsImage uploaded in thread 138829
|
|
Thread upload19 viewsImage uploaded in thread 150119
|
|
Thread upload18 viewsImage uploaded in new thread
|
|
Thread upload6 viewsImage uploaded in thread 179970
|
|
Thread upload6 viewsImage uploaded in thread 196575
|
|
Thread upload30 viewsImage uploaded in thread 136123
|
|
Thread upload19 viewsImage uploaded in thread 136123
|
|
Thread upload23 viewsImage uploaded in thread 136123
|
|
Thread upload16 viewsImage uploaded in thread 136123
|
|
Thread upload14 viewsImage uploaded in thread 136123
|
|
Thread upload18 viewsTree = 1
Land Rover = 0
Darn Trees!!!
|
|
Thread upload5 viewsImage uploaded in thread 143948
|
|
Thread upload31 viewsImage uploaded in thread 160792
|
|
Thread upload28 viewsImage uploaded in thread 160466
|
|
Thread upload5 viewsImage uploaded in thread 182161
|
|
Thread upload8 viewsImage uploaded in thread 139476
|
|
Thread upload7 viewsImage uploaded in thread 139476
|
|
Thread upload17 viewsImage uploaded in thread 148229
|
|
Thread upload6 viewsImage uploaded in thread 150070
|
|
Thread upload9 viewsImage uploaded in thread 148229
|
|
Thread upload13 viewsImage uploaded in thread 148229
|
|
Thread upload14 viewsImage uploaded in thread 128561
|
|
Thread upload16 viewsImage uploaded in thread 172661
|
|
Thread upload10 viewsImage uploaded in thread 135884
|
|
Thread upload10 viewsImage uploaded in thread 135884
|
|
Thread upload15 viewsImage uploaded in thread 135884
|
|
Thread upload9 viewsImage uploaded in thread 135884
|
|
Thread upload5 viewsImage uploaded in thread 198510
|
|
Thread upload15 viewsImage uploaded in thread 156918
|
|
Thread upload18 viewsImage uploaded in thread 156918
|
|
Thread upload19 viewsImage uploaded in thread 156918
|
|
Thread upload17 viewsImage uploaded in thread 156918
|
|
Thread upload17 viewsImage uploaded in thread 156918
|
|
Thread upload18 viewsImage uploaded in thread 156918
|
|
Thread upload14 viewsImage uploaded in thread 156918
|
|
Thread upload17 viewsImage uploaded in thread 156918
|
|
Thread upload13 viewsImage uploaded in thread 172661
|
|
Thread upload21 viewsImage uploaded in thread 149107
|
|
Thread upload8 viewsImage uploaded in thread 172661
|
|
20 Alloys45 views
|
|
Thread upload7 viewsImage uploaded in thread 167409
|
|
Bahrain Land Rover283 views
|
|
Land Rover Stop Tail Light dual filament bulb nominal 12 volt 21 / 5 watt filaments1427 viewsThis is the Land Rover part number 264590 dual filament bulb, (P21/5), that inserts into the upper two tail lamp receptacles. In the upper one, both filaments function, in the lower one, only the 5 watt tail light filament functions.
I regard it as not a good practice to routinely switch bulbs when the tail light filament, (5 watt), burns out on the lower bulb. The broken filament can jiggle over onto the brake light filament, (21 watt), and short the circuit to ground or something else not predicable.
There are also arguments to say that quality control is better on the Land Rover marketed bulbs than say far east sourced bulbs. Filament construction, and hence resistance can vary and mislead the current sensing circuits monitoring the signal light systems. Also when the bulbs are properly installed, all filaments should be standing vertically and not at any slope.
These are the sort of obscure circumstances that can lead to false trouble messages on the display, dropping to the stops, and subsequent concerns - all over a tail/signal light bulb.
For example, the filament life of both the tail light and the brake light filaments in the P21/5 bulb is significantly less than the USA common 1157 dual filament bulb, (1000/250 vs 5000/1200 hours); brightness in the P21/5 is a bit more, (3cp/35cp vs 3cp/32cp where cp is candle power), but current consumption is oddly less, (0.44a/1.86a vs 0.59a/2.10a where a is amps). It is the quest for efficiency vs maintenance trade off.
|
|
40 views
|
|
31 views
|
|
Thread upload53 viewsImage uploaded in new thread
|
|
3 Point Hitch on Series 90152 viewsUsually one sees the Series units with just a conventional field plow hooked to a drawbar hitch, tractor style. This jpg however is the full meal deal - a 3 point hitch, probably off a Fordson tractor, in the long tradition of Ford/Land Rover cooperation.
|
|
4 pin NAS flat connector from NAS small trailer382 viewsThe connector with the three exposed pins is the end that would commonly be located at the trailer hitch end, (front), of a small NAS lightweight trailer that has no electric brakes. This plug would connect into the flat 4 pin connector at the rear of the 3.
Note the order of the pin functions and wire colours: White is ground; the next pin is for tail/marker lights using the Brown wire; the Yellow conductor is for the left turn signal, and the far pin uses the Green conductor for the right turn signal.
There is no separate brake light conductor as NAS spec vehicles most often combine the brake and signal light functions to the same bulb filament rather separate filaments in different bulbs. The LR factory harness resolves that design difference.
Fortunately, the Land Rover NAS assembly pin order for the 4 pin flat plug maintains the above described conventions.
|
|
Thread upload1 viewsImage uploaded in thread 5
|
|
Thread upload176 viewsImage uploaded in new thread
|
|
64 viewsland rover dealer outing
|
|
Thread upload27 viewsImage uploaded in thread 117009
|
|
44 views
|
|
Land Rover298 viewsjust been cleaned hard work lol
|
|
Rosen A7 \'alternative\' install459 views
|
|
CALENDAR 2008 ENTRY823 viewsCALENDAR 2008 ENTRY
Land Rover Island
|
|
CALENDAR 2008 ENTRY771 viewsCALENDAR 2008 ENTRY
Land Rover Island
|
|
Land Rover Advert The Times 26th November 2005422 views
|
|
Land Rover Aerial Fin images for both Glass and Metal Roof Disco3 / LR3864 viewsAs well as the two different fins, this pdf also shows the plastic blanking plate for glass roof vehicles where no fin is installed.
The glass roof fin is secured by two security screws from the top into a plastic frangible glue on gasket. The hope is that when struck, the fin will shear off and not crack the glass roof. Re the metal roof design, the fin is secured from underneath via two nuts.
The pdf also shows the various electrical bits related to the antennas. In the UK, the fin would house not only a cell phone antenna but the TV and satellite radio antenna electronics as well; in the States, the Sirius sat radio antenna and a G type cell phone antenna if the phone kit was installed would reside within the fin. The SAT NAV GPS antenna is located within the High Mount Brake Light plastic mounted to the upper rear hatch.
|
|
Air Conditioner Drain Hose on Drivers Side (LHD)2297 viewsThe corrugated rubber bit above and to the right of the gas pedal is the drain hose that goes down thru the carpet and floor sheet metal.
While it is bit hard to figure out from the jpg above, there is a rubber "strap" attached to the top of the corrugated hose that one uses to pull on to drag the hose up back around the black plastic heater "pan" drain. The same drain hose arrangement is on the other side as well.
One could I suppose run a plastic snap tie around the vertical pull strap if one was concerned about the hose slipping off again. See also the other jpg sketch which is from the Land Rover manual.
|
|
Thread upload10 viewsImage uploaded in new thread
|
|
FOR SALE - ONE OFF Land Rover Disco 3 37 viewsOne of a kind Landrover Discovery TDV6 HSE LUX Model 5 door automatic 4x4 diesel evo blue. Upgrades: sidesteps, roof rails, privacy glass, front and rear heated seats/elec seats, landrover tv and headphones, 7 seater black leather, piano black dash/steering wheel, built in fridge, 6 disc changer, sat nav and bluetooth, harman kardon premium entertainment pack, by-xenon adaptive headlights , cruise control and front and rear park distance control, panoramic electric glass roof, 22inch alloy wheels, body kit
|
|
Ipod interface in Spanish for the touchscreen205 views
|
|
Alternator Plug and B+ terminal919 viewsPictured is the rear of the older Land Rover part # YLE500190 alternator showing the shiny cooling fin of the Regitar VRH2005-142 regulator under.
The first pin in the far left side of the connector is numbered #1 in the LR electrical wiring diagrams and is Battery Voltage Sensing (BVS); the middle pin, #2 receives a Pulse Width Modulated (PWM) signal from the Engine Control Module (ECM), and the right pin, #3 carries a PWM signal back to the ECM. Terminal Pin #2 on the LR wiring diagrams is called Alternator Control or ALT CON; Pin #3 per LR is called Alternator Monitoring or ALT MON.
Pin #1 is similar to what in older designs used to be called A or Batt, but is now called by Denso, S, AS, or Alternator Sensing for this design. Pin #1 also provides power to excite the alternator at startup until the PWM instructions over ride the battery voltage info. Land Rover calls the electronics under the pins a Smart Regulator, ironic, as it has to follow orders from the ECM rather than give the orders - new age thinking I guess. This is different from older design internal regulators that look at just the battery or the electrical buss voltage and then decides itself what to do.
It is almost like we are back to the external regulator designs of old, except that the ECM may decide that instead of telling the alternator to make more power, to load shed, and hence shut down the heated windscreen, seats, or whatever other electrical loads it decides are appropriate. My view is that the "smarts" are in the ECM and that the "regulator" should be regarded if not dumb, then as being a slave to the ECM.
|
|
handrover app (android)29 viewslets offroad
|
|
Compressor type TSB109 viewsLand Rover TSB regarding Compressor type identification and fitment.
|
|
Thread upload11 viewsImage uploaded in thread 189588
|
|
208 viewsin its usual state with a 5.6 m trailer weighing anything up to 3.5 tons. it is the best tow vehicle i have ever owned and eve better than my 130 land rover
|
|
Land Rover Santa12 views
|
|
Thread upload13 viewsImage uploaded in thread 64916
|
|
Thread upload15 viewsImage uploaded in thread 64916
|
|
wormhough63 views
|
|
stuck first time81 views
|
|
Dicky helping,second time74 views
|
|
66 views
|
|
Nice58 views
|
|
BCI Group 40R Deka 640RMF battery showing vent hose run forward to windshield washer reservoir area 1430 viewsRecessed post "Euro profile" battery to "match" OEM and stock Land Rover bracket; note that the Traxide SC80-LR module is mounted at an angle to allow for the main cable to sit under the cover so cover still closes.
The battery is a nominal 7", (180mm), high, but sits on a 1" battery spacer set under to raise the bottom front end of the battery such that the approx 11", (290 mm), length of the BCI 40R battery rises above the angled plastic nibs at the forward end bottom of the case front; hence sufficient space, (1/4", 5mm) remains at the brake reservoir end.
Also the 40R battery does not have hold down "flanges" on each end; on the sides yes, but not the ends so no additional length is required.
When I had to replace the 40R, this time I installed the shorter, (9.625"), taller, (7.5") Interstate BCI 47 / DIN H5 battery which eliminated the spacer on the bottom and better fit the stock LR tie down bolt lengths. Deka also has a BCI 47 / DIN H5 that would work fine as well.
|
|
B12 TransK9 Dog Transit Box for Discovery 53 views
|
|
B24 TransK9 Dog Transit Box for Discovery 471 viewsThis box is designed specifically for the Discovery so that the 6th seat can also be used.
|
|
Thread upload23 viewsImage uploaded in new thread
|
|
Thread upload12 viewsImage uploaded in new thread
|
|
Baby Land Rover151 views
|
|
Thread upload20 viewsImage uploaded in thread 173075
|
|
The new with the old693 viewsCALENDAR 2011
The new with the old: a Discovery 4 and a Series 1 during the Scottish Land Rover Owners Club (SLROC) Tyro event at Ballencrieff Farm, Bathgate, Saturday, 5th of December 2009.
|
|
126 views
|
|
Land Rover Branded Beer Fridge76 views
|
|
Modified Land Rover badging92 views
|
|
Modified Land Rover badging91 views
|
|
Thread upload9 viewsImage uploaded in new thread
|
|
Thread upload10 viewsImage uploaded in new thread
|
|
Blinman Landrover Trials 2005299 views
|
|
Blinman Landrover Trials 2005337 views
|
|
One of the trails at George Washington National Forest - Harrisonburg, VA139 views
|
|
Brake Light Switch, Find, Remove, and Install Instructions 7853 viewsThis is a two page doc outlining where to find the brake light switch, how to remove it, and then install the new one.
Note, do not move the brake pedal when removing or installing the switch. Let the brake pedal hang where it wants to. The switch design is actually cunning, and as such is supposed to make the removal and install fool proof. Hence if you think too much about it, you can wreck the new switch.
If you want to inspect the interior of the switch, wait until you have removed the old switch. You can then just unsnap the blue from the white to get it apart. Inside, the switch is quite simple, (no circuit boards), but it will probably show black dust from failing contacts.
I think the reason the switch fails is that the Normally Open, (NO), contacts of the brake light contacts were made too light to carry the current load for make and break of the tail light filaments. I also think the black dust created then fouls the Normally Closed, (NC), second set of contacts for the ABS circuit. As such, the Normally Closed contacts become intermittent in operation and display as a fluctuating open and closed circuit condition to the ABS system when the ABS should be seeing a steady closed circuit. Hopefully the replacement switch contacts are more robust and may be as I recently replaced my switch again just as a matter of maintenance. While in a redesign, ideally the NC contacts should be sealed or at least separated from the NO contacts, when I inspected the removed switch, this time there was no black dust present.
Probably the removed switch will have a Land Rover oval logo moulded into it, the new one, FOMOCO.
|
|
Black Deposits on Brake Light Switch Plunger2758 viewsThis jpg I got off another forum and is typical of what one will see when one opens up the removed brake light switch. The black powder is residue from arcing of one of the pair of contacts within.
Hopefully the newer switches with the FOMOCO logo moulded into the plastic are improved from the Land Rover logo marked early units, however I doubt it.
The Ford part number is SW-6572 and/or 7E5Z-13480-A as used on the 2006 to 2009 Ford Fusion's and Mercury Milan's; the Land Rover part number is XKB500110. Cost of switch could be about twenty five dollars. A previous LR part number for the switch was XKB500030, so hopefully the newer LR part number, XKB500110, reflects some improvement in reliability.
It is possible that the new switches are better as I installed a replacement 72,000 km, (45,000 miles) later, at 195,000 km (121,000 miles). When I took the removed switch apart to inspect, it was clean inside. There was no black dust - the switch looked like new, hence they must be improved now.
|
|
Vertical Breather Hose before cutting off OEM cap.1778 viewsThis shows the plastic vertical breather tubing and OEM cap prior to being cut off. The tubing is located on the driver side at the front near the radiator. One cuts about 3/4" to 1" off from the top. The TSB says 20mm.
I tried blowing thru the cut off piece and was not very successful. The cap seemed plugged. I am beginning to think that there was a very good reason for Land Rovers's Technical Service Bulletin, (TSB).
|
|
Thread upload32 viewsImage uploaded in thread 172661
|
|
Thread upload6 viewsImage uploaded in new thread
|
|
Thread upload3 viewsImage uploaded in new thread
|
|
Land Rovers at Carinya Escapes334 views
|
|
10 views
|
|
Discovery 3 TDV6 2.7 HSE250 viewsJust traded in for Discovery 4 SDV6 3.0 HSE (Feb 2012)3rd Landrover
|
|
Snow Chains Installed - Land Rover LR3HSE94 viewsSnow Chains that seem to fit a Land Rover LR3HSE
|
|
chrome wrapped FFRR31 viewschrome wrapped FFRR
|
|
Range Rover63 views
|
|
Supercharged Stats57 views
|
|
70 viewsMy Greean Meany 1976 range rover S1 3.5
|
|
Thread upload2 viewsImage uploaded in thread 156918
|
|
Clip Spring Metal FYC 500040 that holds LR together1747 viewsThe jpg is of the spring metal clip, Land Rover part number FYC 500040 that holds most of our 3 together - well at least most the interior trim parts.
If you are going to remove interior panels, you may as well stock up on a few for replacement as upon panel removal, the clips tend to spring away into deep never to be found voids within your 3.
|
|
Cooling system hoses - 4.4L petrol V81109 viewsThese are the cooling system hoses on the 4.4L petrol V8. The little odd shaped bleeder hose, (LR006158), shown in the top right hand corner can give problems. There is a plastic tee with a threaded air bleeder outlet located in the middle of the hose. The plastic tee can or will fail due to I guess heat distress.
A BIC pen can serve as a field fix, however for your parts kit, a nominal 3/8" ID hose size brass hose barb inline connector plus a couple of hose clamps is suggested. Better yet is a threaded hose barb brass coupling or a tee and bleeder valve to allow bleeding of the line. Land Rover now makes the plastic bleeder valve that breaks available as a separate part, # LR027661, where 0 is a zero. As such, one can now purchase that part only for addition to your field fix parts kit.
|
|
Detroit Fluid DOT air line fittings718 viewsThe picture shows the internal ferrule that is characteristic of the DOT / TUV accepted fittings for highway vehicles. Most often these fittings are metal however the Land Rover John Guest 6mm straight connector is all plastic and has the internal ferrule.
|
|
102 views
|
|
The cover frozen to my Rover Doh!51 views
|
|
Cromodora brand marking on inside of spoke.326 viewsThis is the Cromodora brand marking on the inside of the 6 spoke 19" wheels, Land Rover part number ALY72191U. Similar brand markings are cast onto the inside surface of the spokes on all Land Rover Cromodora wheels.
|
|
E-DOT and Japan wheel acceptance marking on ten spoke wheels.335 viewsThese are the E-DOT and Japanese wheel acceptance markings on the inside of one of the ten spokes of the 8J x 18" wheel, Land Rover part number ALY72190U or RRC500250xxx where xxx is the colour number, in this case, MNH for Sparkle Silver. There are similar markings on all Cromodora wheels for the 3.
|
|
Part number moulded into spoke of 18" ten spoke. 322 viewsThis part number, RRC500250XXX is moulded into the backside of one of the spokes of the ten spoke 18" wheel. An alternate part number is ALY72190U or ALY72190U85 which relates to year and finish.
Another number is RRC500250MNH where MNH is also the finish, probably Sparkle Silver.
|
|
Bespoke Land Rover Cup Holders97 views
|
|
Evoque Style 478 views
|
|
25 viewsCERS Founder and China's 'greatest living explorer' Dr Wong How Man joined the Journey of Discovery in Dunhuang, China - a symbolic intersection of the Silk Road where the East meets West.
Interactive Land Rover MENA
|
|
Land Rover Discovery 3 'Comfort' - Detailed views411 viewsCopied from Land Rover Magazine Number 40 (Japanese edition)
|
|
Steering wheel audio controls and iPod dock103 viewsFitted an iPod dock and steering wheel audio controls. Got then both from Nick at Yeoval Landrover in the UK at a fraction of the price that the Aussie dealer wanted.
|
|
Discovery 3 TDV8101 viewsSaw this on the UK Land Rover site on 23 oct 2007.
|
|
20 viewsCourtesy of: Interactive Land Rover MENA
24 April
Back in the city – after a wild set of adventures in destinations from mountains to deserts, cities to nomad camps, the Land Rover Journey of Discovery heads through urban Beijing at journey’s end.
|
|
25 viewsThe iconic finish line - driving through Tiananmen Square in Beijing, China, at the end of a dramatic 8,000-mile of the Land Rover Journey of Discovery.Courtesy of Interactive Land Rover MENA's FB page
|
|
D4 HSE165 viewsLand Rover Discovery 4 HSE MY2012
|
|
375 ml jam container372 viewsThese are the 375ml Danish Orchard brand jam containers. They fit fairly tightly into the original old style, (2005/6) Land Rover 3 factory cup holders. The extra height provided by the containers can be an advantage. I have a similar assortment of containers in some of the door panel located wine bottle holders to better hold containers of lesser valued products.
|
|
arm rest fit213 viewsthis is gary from trim-line... a job he knows to well as he is in landrover dealers most weeks..
|
|
Border Rover on a Day Out.45 views
|
|
76 views
|
|
Defender in the Fog, another day on the job.459 viewsThis is another normal work day for a Defender - actually the jpg is from a Land Rover advertising shot, but it may just not be a set up one. I think it is an actual working Defender. Note the visible front tow hook and how the hi lift is just rope tied on; also the normal stock headlights and I guess dual spare tyres - just another day on the job.
|
|
Deka Battery Dimension Data615 viewsThe battery size that I installed for my auxiliary was a BCI 40R battery as it was for me the easiest to fit and was also a cranking battery. The case profile was such that no tie down fins were located on either bottom end, (sides yes), and length wise, it was only about 11" (290 mm) long. As such, I did not have to grind the nibs at the front bottom of the plastic surround.
I did however raise the bottom of the battery above the angled nibs as I set the battery on a 1" (25mm) high plastic spacer. The total height, (battery plus spacer), was about 8" (200mm) so the battery top still fit under the Land Rover factory cover.
For the Aux battery, when I replaced the 40R, I installed an Interstate BCI 47 which is similar in size to a DIN H5. I was therefore able to eliminate the vertical spacer as the Group 47/H5 is the same height as the DIN H7/H8 stock LR spec starting battery. As such, the standard battery tie down bolts can be used without modification. The Group 47 battery is 9 11/16" long x 6 7/8" wide x 7 1/2" (190mm) high.
|
|
Camping Chanteloup213 views
|
|
41 views
|
|
Number Plate101 viewsSeen recently in Pacific Landrover in Marochydore QLD, its genuine.
|
|
the ole 96 disco on one of several 4000 mile road trips. In Colorado here with a another Land Rover behind176 views
|
|
screw behind land rover badge553 views
|
|
155 viewsA pic \'borrowed\' from the Landrovernet site
|
|
My First Discovery 3 - Replaced by Land Rover736 views
|
|
My 1st Discovery 3 - replaced by Land Rover593 views
|
|
CALENDAR ENTRY297 viewsCALENDAR ENTRY
Blue Ridge Land Rover Club
Blue Stone Lake, West Virginia, USA
|
|
CALENDAR ENTRY282 viewsCALENDAR ENTRY
Blue Ridge Land Rover Club
Bluestone Lake Reservoir, West Virginia, USA
|
|
Discojock 159 viewsCairns Blue with Shadow Chrome Range Rover Sport Insert.
|
|
100 viewsSORRY FOR THE LEVEL.....but
In the world there are only 2 OFF ROAD VEHICLE: the old italian Fiat Campagnola and new Land Rover Discovery3..
The 1st is dead, the 2nd is sold...Why the best have a problems?
|
|
Thread upload34 viewsImage uploaded in new thread
|
|
Thread upload24 viewsImage uploaded in new thread
|
|
Thread upload31 viewsImage uploaded in thread 161817
|
|
Thread upload30 viewsImage uploaded in thread 161817
|
|
Discovery 2.5 TDI24 viewsMy first Landrover Discovery
|
|
Discovery 2.5 TDI24 viewsMy first Landrover Discovery
|
|
Land Rover & Range Rover suspension validation workbook33 viewsUsed to validate the suspension tolerances and check if there are leaks, and if so what corner.
|
|
Thread upload6 viewsImage uploaded in thread 157786
|
|
D356 views
|
|
Thread upload42 viewsImage uploaded in thread 105433
|
|
Land Rover logo on the engine cover298 views
|
|
'Proper' Land Rover! (we know otherwise)307 views
|
|
Lunch a'la Land Rover419 views
|
|
Land Rover World580 viewsLand Rover World editorial item
|
|
New Nav Sat option from Land Rover (Kenwood DNX7200)244 views
|
|
New Nav Sat option from Land Rover (Kenwood DNX7200)227 views
|
|
27litre RR Meteor engined Rover SD184 views
|
|
Range Rover Sport87 views
|
|
Not the FR rack, but what was left of the Land Rover rack after a door incident218 views
|
|
Not the FR rack, but what was left of the Land Rover rack after a door incident182 views
|
|
Not the FR rack, but what was left of the Land Rover rack after a door incident151 views
|
|
Not the FR rack, but what was left of the Land Rover rack after a door incident173 views
|
|
Trailer with Land Rover Wheels & Cooper tyres230 views
|
|
The garage. Land Rover LR3, Subaru Impreza 2.5RS and Honda VFR800 VTEC63 views
|
|
a Defender 150. Apparently 5 were made. We saw this one at Land Rover in Windhoek, Namibia178 views
|
|
Land rover G4 disco B.Z314 views
|
|
New engine139 viewsReplacement engine, reconditioned unit via Land Rover Australia, circa $6k
|
|
Land Rover Experience Dunkeld June 2009337 viewsCALENDAR 2010
|
|
Dead Range Rover - someone took the descent too fast164 views
|
|
Other Rovers competing 2151 viewsNice Def 90 TD5
|
|
Other Rovers competing 1164 viewsDisco 1 at the scruteneer\'s meeting
|
|
have a land rover80 views
|
|
Avic-F500BT164 viewsIntegrated Pioneer System with original Land rover Logo
|
|
Son's first proper Land Rover driving experience!17 views
|
|
Range Rover 18" wheels131 viewsStandard RR 18" courtesy of Pilling LR.
|
|
Landrover badge of honour!174 views
|
|
HAmsters landrover151 viewsV8 4.2Ltr ..... what a noise!
|
|
HAmsters landrover 2157 viewsAnother view!
|
|
Cordless Land Rover Headsets55 views
|
|
Nudge Bar + Landrover Spots235 views
|
|
Land Rover on Salisbury Plain300 viewsCALENDAR ENTRY?
|
|
Nature craft school in Landrover Japan event149 views
|
|
Landrover Japan event165 views
|
|
CALENDAR 2011302 viewsLand Rover evolution...
|
|
Landrover Bike Rack59 views
|
|
38 viewsDown a 35% slope - we weren't allowed on the 45% slope. The centre Land Rover SA use is a military version of MIRA. There were some pretty strange things hurtling around the oval track while we were there.
|
|
Range Rover Storm484 viewsWhy didnt they make this ??
|
|
Range Rover Evoque75 views
|
|
G4 Range Rover386 views
|
|
Number 2 Production Land Rover10 views
|
|
Land Rover Minerva Ambulance10 views
|
|
Yes - the Suzuki is recovering the Range Rover!!! - and it did!!!836 views
|
|
149 viewsThis is a JPEG Taken from the CAD drawing, it has nothing to do with NEXT BASE OR LAND ROVER,FORD TATA, its just a FUN Model and not to be used.......
|
|
Land Rover in the sun.85 views
|
|
Leopard21 viewsLR prototype electric vehicle - game viewer with TrailAir fitted
|
|
Thread upload26 viewsImage uploaded in thread 115982
|
|
View from the Fairmile Carpark of 9 members cars198 viewsRange Rover Au Poivre had turned up by now - VA was having seat as well as steak sauce problems! I think we had 2 more turn up after this photo was taken
|
|
Thread upload19 viewsImage uploaded in thread 35293
|
|
Fiche_LandRover_Disco3-4 Outback Import74 views
|
|
Out On Field day91 viewsOut on a Amateur Radio field day. Full trailer and landrover load space with equipment. Defender also full!!
|
|
Thread upload44 viewsImage uploaded in thread 126525
|
|
Ford Sounder 4L1Z-15K864 A that I installed.12 viewsThis is the Ford sounder, part number 4L1Z-15K864 that I purchased and installed in lieu of the official Land Rover sounder. Note the part number is what is printed on the box (and also my invoice) but the part number on the sounder body is a bit different. I think a new box/invoice related part number is created each time the price of a part is changed. Regardless the Ford sounder was about half the cost of the Land Rover part and sounds the same as the removed factory buzzer.
|
|
Cerchi 18'' Land Rover40 views
|
|
Cerchi 18'' Land Rover37 views
|
|
Cerchi 18'' Land Rover39 views
|
|
Southern Namibia - Frederickshoop304 viewsPrivate road to service a mobile cellular base station. Terrifying 500m drops.
|
|
Calendar 2010291 viewsLand Rover Discovery 3 in Southern Namibia. A private road constructed by my employer to service cellular base stations. The location is Frederickshoop in the South of the country. 500m drops made this terrifying.
|
|
Thread upload34 viewsImage uploaded in thread 163443
|
|
Thread upload16 viewsImage uploaded in new thread
|
|
Land Rover TSB LTB00245 install instructions1940 viewsThis is the Land Rover Technical Service Bulletin showing how to install the new breather cap. The instructions are a bit vague re cutting the existing air vent tubing on a 45 degree angle with the cut facing to the rear.
|
|
Thread upload14 viewsImage uploaded in thread 152884
|
|
Thread upload16 viewsImage uploaded in thread 152884
|
|
Thread upload5 viewsImage uploaded in thread 180233
|
|
Gancio_Traino_LAND_ROVER_DISCOVERY_3_istruzioni129 viewsistruzioni discovery
|
|
Gancio_Traino_LAND_ROVER_DISCOVERY_3_istruzioni_274 viewsistruzioni discovery
|
|
Gancio_traino_omologazione_LAND_ROVER_DISCOVERY_373 viewsGancio Traino LAND ROVER DISCOVERY 3 istruzioni
|
|
Series LR at Oil Sands Plant in Northern Canada circa 1968747 viewsThis is an end of shift picture taken about 1968 at the Great Canadian Oil Sands (GCOS) plant while under construction in the Ft McMurray area of Northern Canada.
I was surprised to see the yellow coloured Series single cab hardtop pickup parked in about the centre of the picture. I would say it is one of the few on site as most vehicles were Chevrolet's, (as are the other three trucks elsewhere in the view). The yellow painted vehicles including the Land Rover are most likely Bechtel owned - not leased - yes, that long ago now.
|
|
Thread upload2 viewsImage uploaded in thread 197502
|
|
We\'ve even got some mud when it\'s rained109 views
|
|
Oil specifications for land Rover models198 views
|
|
37 views
|
|
Thread upload2 viewsImage uploaded in new thread
|
|
handrover app (android)25 views
|
|
Reversing camera sat nav land rover instructions hids4u506 viewsReversing camera retrofit on land rover lexus jaguar and many other cars. Display image on the sat nav lcd screen
|
|
Curt Manufacturing brand hitch, assembled but not installed.290 viewsThe Curt Manufacturing hitch is an alternate to the Land Rover removable "plow" hitch. Once bolted in place, the Curt hitch is always there.
The Curt part number is 13456. It is a Class III hitch with a 2" square receiver and designed for a maximum 600 pound tongue weight.
The hitch hangs below the rear bumper but does not stick out past the bumper; also the "donut" spare tyre can still be installed / removed; am not so certain about a full sized fully inflated spare.
|
|
Rhino Tow Loop Hitch270 viewsThis is a receiver end view of the Rhino Hitch that ties to the factory tow loop. In addition to improved strength, it does not reduce ground clearance as does the factory style when installed.
Land Rover in early advertising videos when the 3 first came out showed the D3 hanging from a crane via the frame. The intent was to show how strong the frame is and by inference, the rear tow loop, specifically noted as being good for 6 tonne. The video ends before anything dropped or was lowered back to the ground, so one of course does not know for certain. The Rhino Hitch design however picks up on the apparent evidence of strength and certainly the additional clearance.
|
|
Side steps removal947 views
|
|
multi height tow bar2173 views
|
|
multi height tow bar1183 views
|
|
Spesial message, diff noise170 views
|
|
Sliding Loadspace Floor223 views
|
|
506 views
|
|
113 views
|
|
Stainless Steel Accessory Instructions357 views
|
|
Rear Spoiler Fitting Instructions LR131 views.
|
|
FL2 MOST Bluetooth Instalation Instructions97 views
|
|
Tailgate Spoiler171 views
|
|
68 views
|
|
DPF196 views
|
|
Thread upload0 viewsImage uploaded in thread 204567
|
|
Dog Guard17 viewsGenuine Land Rover full height dog guard / load divider
|
|
Thread upload24 viewsImage uploaded in thread 35293
|
|
Salisbury Plain301 viewsMy other club (Range Rover Register) had a plains day, ironically none of the 5 vehicles present were RR but 3 were at least from the same factory!
|
|
Finished project75 viewsScary start but the end result is AWESOME!!
|
|
Thule 2 bike rack12 viewsTow bar mounted bike rack - genuine Land Rover
|
|
Land Rover Experience Scotland16 views
|
|
set of four land rover 19" 6 spoke alloys with wrangler MTR's as per G4 spec29 viewsFor sale the set of four tyres and wheels . tyres are new having only traveled 2000 miles
|
|
Discovery TD5 ES Premium35 viewsTraded in (Nov 2007) for Discovery 3 2nd Landrover
|
|
Bright Red Full Fat Range Rover104 views
|
|
38A Range Rover.126 viewsPhoto taken at dealers 10 mins before hand over for D3
|
|
Range Rover part ex\'d on 11-3-06138 views4 litre petrol HSE, great motor.
|
|
Headlight mod82 viewsQuick preview of painted reflectors behind the lens
|
|
Headlight mod77 viewsNo turning back now..
|
|
Land Rover Experience, Drive Your Own Day13 viewsDrive your own vehicle off road in thousands of acres of Peckforton Estate.
|
|
Land Rover DRLs35 views
|
|
Headlight mod79 viewsAlot of hours for alil prep work..
|
|
Rockingham175 viewsPhoto taken at landrover experience rockingham
|
|
Headlight mod88 viewsAmber lens was quick to dissappear..
|
|
Headlight mod266 viewsHeadlight mod to my07 land rover discovery 3
|
|
Land Rover Love31 views
|
|
Range Rovers old to new Pic 319 views
|
|
Range Rovers old to new Pic 218 views
|
|
Range Rovers old to new Pic 115 views
|
|
LED Sidelight Land rover96 views
|
|
LED Sidelight Land rover 1105 views
|
|
led module land rover84 views
|
|
Replica Landrover wheel '1812 views
|
|
33 viewsZermatt Silver with Silver Range Rover Sport insert.
|
|
Rovertym Height Sensor Rods109 views
|
|
Discovery 4 DRL Land Rover Fitted112 viewsThese are the official Land Rover Fitted Daytime Running Lights. They are very good with a sharp clear light. They are on all the time but as soon as the normal lights come on they switch off. These were fitted to my car by Land Rover when I picked it up.
|
|
Discovery 4 DRL 117 viewsThe photo shows the Land Rover Discovery 4 fitted with the Land Rover Daytime Running Lights. These were fitted by Land Rover when I got the car. The are on when the lights are not. As soon as the main lights come on the DRL's switch off.
|
|
2111 viewsPiano black letters and Land Rover badges
|
|
land rover reversing camera 173 views
|
|
42 viewsCairns Blue with Silver Range Rover Sport Insert.
|
|
30 viewsStornoway Grey with Shadow Chrome Range Rover Sport insert.
|
|
Before wheeling49 viewsBefore embarking on a forest run with the MN Land Rovers Club in the Superior National Forest in Minnesota.
|
|
South Australian Landrover Show - Melrose 201318 views
|
|
scafel pike 3108 viewsJust picked up my new car from Lakeland Land Rover & couldn't resist the opportunity to climb Scafel Pike
|
|
scafel pike 299 viewsJust picked up my new car from Lakeland Land Rover & couldn't resist the opportunity to climb Scafel Pike
|
|
scafel pike 1100 viewsJust picked up my new car from Lakeland Land Rover & couldn't resist the opportunity to climb Scafel Pike
|
|
Helvelyn 117 viewsJust picked up my new car from Lakeland Land Rover & couldn't resist the opportunity to climb Scafel Pike
|
|
After wheeling47 viewsAfter embarking on trail rides with MN Land Rovers Club
|
|
Frontrunner Sump Guard Fitted12 viewsSGLD009
https://www.frontrunneroutfitters.com/en/be/protection-equipment/under-vehicle-protection/land-rover-discovery-2014-present-sump-guard-4-5mm-3cr12-stainless-steel-front-runner.html
|
|
Tree (1) - Land Rover (0)32 views
|
|
Land Rover Experience 11035 views
|
|
21 viewsStornoway Grey with Shadow Chrome Range Rover Sport insert.
|
|
15 viewsJava Black with Silver Range Rover Sport insert.
|
|
"Waterover"as described by 5 year old daughter282 viewsSmall run through Burn at Drumclog
|
|
Why take the lift when you have a Landrover49 viewsHolidays in France high up in the Pyrenees we decided to drive up to the top of the Pic du Midi at an altitude of 2877m instead of taking the £60-00 cable car. Just don't look down. What a Day!
|
|
Why take the lift when you have a Landrover233 viewsHolidays in France high up in the Pyrenees we decided to drive up to the top of the Pic du Midi at an altitude of 2877m instead of taking the £60-00 cable car. Just don\'t look down. What a Day!
|
|
H7R land rover HID Kit79 views
|
|
Two Wheeled Land Rover37 views
|
|
I replaced the incadescent license plate bulbs with new 6-LED bulbs for a cleaner look.420 viewsI was following a 2006 Lexus ES and noticed their license plate bulbs are now using LEDs, so I thought the same thing would look good on the rover.
|
|
My first ever Land Rover..1 views
|
|
Inflating the boat at Foz180 viewsBruce had 2 Gemini inflatables on top of the Defender, with 2 engines in the rear compartment. Inflating the boats took about 30 minutes. The plan was to cross the Cunene and greet the miners on the Namibian side, which is where the Outside Edge expedition had left off a couple of weeks prior - they couldn\'t cross the Cunene in Land Rovers, so they had to go around - a detour of some 2000km
|
|
2013 Range Rover testing on Mull34 views
|
|
| 1144 files on 3 page(s) |
 |
1 | |
|
|
