Member Since: 22 Sep 2010
Location: Notts.
Posts: 8121
Yes, but the brake lights do not come on.It can when others can't,
It will when others won't,
It goes where others don't.
21st Apr 2024 2:28 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4673
Go to the CJB fuse box and check / replace fuse no 14 5a.yµ (idµ - eAµ) ψ=mψ
21st Apr 2024 2:39 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8121
itsaguything wrote:
"……………..
3. confirm malfunctioning component. Next logical step. Have you proved to yourself the start button is good?
If 1 and 2 are still valid and/or complete, has 3 been done?
Its a matter of process… Have you looked at the workshop manual? The pinpoint tests continue.
Cheers.
I have only done a continuous test with the multi meter, there is definitely over 12v at the connector, probably next step new switch.
Do the brake lights work when the engine is off, something I have never noticed, mine don’t.
Thanks for your input. It can when others can't,
It will when others won't,
It goes where others don't.
21st Apr 2024 2:54 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4673
Yes, and if live values is showing the brake switch in the off position it simply will not start!!!!
FUSES or electrical break/issue! Just replace the brake lamp fuse (14) and never mind checking it. Same goes for any other management fuse. yµ (idµ - eAµ) ψ=mψ
21st Apr 2024 3:15 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8121
Click image to enlarge
New SS switch ordered if that doesn't cure its of to the nackers yard had enough It can when others can't,
It will when others won't,
It goes where others don't.
21st Apr 2024 7:56 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4673
Can you have a look in the body control module an see what voltages are present for:
"Active fuel level sensor A" and "Passive fuel level sensor B"
Something seems to be blocking the brake pedal signal and I'm wondering if it's fuel level sensor related?yµ (idµ - eAµ) ψ=mψ
21st Apr 2024 8:07 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8121
Yes but it will have to be tomorrow evening now. It can when others can't,
It will when others won't,
It goes where others don't.
21st Apr 2024 8:45 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8121
Spent 2 hours with the Iid tool and I can’t find anything but I have found on YouTube a scheme of the connector socket above the rear NS wheel that give the PIN numbers of the two senders, I will try and access them tomorrow.It can when others can't,
It will when others won't,
It goes where others don't.
22nd Apr 2024 8:28 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4673
Well ive been reluctant to send you chasing the wiring in case I was wrong. However, since you have decided to go that route if that's not the culprit there's the other two connectors I think in the O/S front wheel arch. yµ (idµ - eAµ) ψ=mψ
22nd Apr 2024 9:49 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13670
Hi den
Funny enough I thought I read somewhere that near side connector can knock out the fuel gauge and if it also has an epb supply error it can also stop the brake light from working
Saying that would assume there would have been errors so weird that there arnt any
Fingers crossed it’s in that N/S connector and just needs a clean out on the pins
22nd Apr 2024 10:53 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13670
M3DPO wrote:
Spent 2 hours with the Iid tool and I can’t find anything but I have found on YouTube a scheme of the connector socket above the rear NS wheel that give the PIN numbers of the two senders, I will try and access them tomorrow.
Really hope that’s the issue and isn’t to much hassle to resolve as nothing more frustrating than trying to sort out electrical issues
All the very best to you
Last edited by gstuart on 22nd Apr 2024 10:59 pm. Edited 1 time in total
22nd Apr 2024 10:58 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4673
You could be right Gary, it's not the first time for me getting my left and right mixed up these days. yµ (idµ - eAµ) ψ=mψ
22nd Apr 2024 10:58 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13670
Also think one of the 120 ohm resisters are inside the EPB module and the other in the ECM for one of the canbus sides, if there was an error inside would assume it would show a 120 reading instead of the usual 60 ohms on a canbus test
Sorry I’m waffling again
Last edited by gstuart on 23rd Apr 2024 12:10 am. Edited 1 time in total
22nd Apr 2024 11:05 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13670
By the way found this and hope it may be useful to u
Click image to enlarge
Click image to enlarge
22nd Apr 2024 11:25 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8121
I’ve found out the fuel tank senders are now included in the latest version of the Iid tool software, so I’ve been up since 5-00am getting my ancient computer running as I don’t use it much, finally managed to upload the software into the Iid tool, really excited, go outside and plug it in and what’s the first thing it asks me to do?- SWITCH THE ENGINE ON It can when others can't,
It will when others won't,
It goes where others don't.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
