| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
1powerrack
Member Since: 09 Nov 2014
Location: Greater Manchester
Posts: 149
|
| fault codes after flashing ccf |
|
hello all.
I am hoping someone maybe able to help, I do have a D3, but this one is on my Freelander i6 from Japan, I decided to set the radio band from Japan to European range which worked using Nanocm / Genesis, but after the car does not start, all dash light come as expected, the 2 error codes below are seen on the Nanocom, when removing the codes only 1/ is cleared -- 2/ is permanent maybe SDD is needed?
If I clear 1/ U0167 lost comms with vehicle immobiliser control module and try yo restart nothing happens and error 1/ is back.
I have tried a hard reset from the notes on this forum, but that did not clear starting problem, so I am hoping someone may have hint to fix, there has been no response on the Freelander forum
1/ U0167 lost comms with vehicle immobiliser control module
2/ U2101 -ECU infortain - control module incompatible
thanks
Glenn D3 4.4 V8 2005 sadly now gone
Freelander 2 i6 HSE now gone was a very good 4x4
Triumph TR8
|
 7th May 2021 11:37 am |
|
|
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459
  
|
Have you tried changing it back and see what happens Andrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
|
| 7th May 2021 1:32 pm |
|
|
1powerrack
Member Since: 09 Nov 2014
Location: Greater Manchester
Posts: 149
|
Hi,
no not yet, I was thinking of just doing the flash again to see what happens, as the radio is working to European bands now
Glenn D3 4.4 V8 2005 sadly now gone
Freelander 2 i6 HSE now gone was a very good 4x4
Triumph TR8
|
| 7th May 2021 2:00 pm |
|
|
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8069
 
|
Don’t know about the Freelander but with a D3/4 you can change language and location with the car set up controls, no need for diagnostic tool.
Make sure you have a good well charged battery before making changes. It can when others can't,
It will when others won't,
It goes where others don't.
|
| 7th May 2021 2:10 pm |
|
|
1powerrack
Member Since: 09 Nov 2014
Location: Greater Manchester
Posts: 149
|
with the 2008 F2 its a ccf file edit in the audio config, the battery was good at the time of edit and execution, and it went well, I have just been on SDD but could not find anything for vehicle immobiliser control module to reset, really hacked off with this car its a liability, thanks for the input going to leave it for a day to calm down
cheers D3 4.4 V8 2005 sadly now gone
Freelander 2 i6 HSE now gone was a very good 4x4
Triumph TR8
|
| 7th May 2021 3:22 pm |
|
|
1powerrack
Member Since: 09 Nov 2014
Location: Greater Manchester
Posts: 149
|
Today I flashed back the ccf for Japan radio bands, but this did not resolve the issue of not starting, with both faults as before
1/ U0167 lost comms with vehicle immobiliser control module
2/ U2101 -ECU infortain - control module incompatible
so I flashed back to European frequency bands, if the 2 error codes could be resolved then all would be ok, I noticed on the Nanocom there is an option to Reset the Vehicle, has anyone done this and if so what happens?
still a stationary silver brick D3 4.4 V8 2005 sadly now gone
Freelander 2 i6 HSE now gone was a very good 4x4
Triumph TR8
|
| 9th May 2021 8:23 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
