Help Please - Retro Fit Front Fogs, Front PDC and Washers
Just got myself a fully spec'd front bumper with all of the above.
Fitting to a MY07 GS. So I obviously need a new light switch and loom for the fogs. What else do I have to do, to get the washers and PDC to work - If indeed I can ??
TFC where are you "To finish first, one first has to finish ...."
19th Feb 2008 9:27 pm
13aldy13
Member Since: 12 Feb 2008
Location: Cambridge
Posts: 95
I have just bought the same thing so any help would be appreciated, mine is an early 54 plate S model.
Incidently 90BHP where did you get yours from??
lol same chap as you I think, e-bay ?
Same price and painted in Stornaway grey too - I hope "To finish first, one first has to finish ...."
19th Feb 2008 10:36 pm
13aldy13
Member Since: 12 Feb 2008
Location: Cambridge
Posts: 95
Lets hope someone comes up with some ideas on how to get all the kit to work then, otherwise they will be 2 disco 3's driving about all specced up but nothing working
Do a search for front+pdc and scroll through. You will come to a 2 page post where TFC (ten for Cash) lists the part numbers you need. Front loom for Fogs and PDC + you will then need somebody (TFC?) to enable the option with an autologic set-up.
Looks like with a new lightswitch and loom you / we will be able to the fogs working. Washers require some work and a pump in the waterbottle.
All in all not too much work for a lot of options. Are you picking yours up from Oxford ?"To finish first, one first has to finish ...."
19th Feb 2008 10:59 pm
13aldy13
Member Since: 12 Feb 2008
Location: Cambridge
Posts: 95
Yes picking up from Oxford, well its Ardley near Bicester according to the post code he gave me, hopefully going down Thurs PM. Will look for that thread hopefully as you say little bit of work for a few nice improvements
Member Since: 12 Feb 2008
Location: Cambridge
Posts: 95
Thanks for that have read the thread, only problem i can foresee is I don't have rear pdc, was going to retro fit that as well, still looking for a rear bumper
Last edited by 13aldy13 on 19th Feb 2008 11:45 pm. Edited 1 time in total
TFC will probably give you the best help. I will ask my brother too, if I can find him - working for LR somewhere in Middle East or Borneo at the Mo - "To finish first, one first has to finish ...."
if you have the bumper fitted with fogs then a compatible wiringloom (£20) and a new internal light swith (£20) are also required...
i've supplied these fog kits too members who have fitted and not needed them aactivated...but if on connection they won't work you will need either TFC or dealer activation.
NickTLO has left the building.......
I no longer work for a Landrover Dealer
My little chilli sauce business http://www.thechillees.co.uk
if you would like to order anything just give me a shout
Do a search for front+pdc and scroll through. You will come to a 2 page post where TFC (ten for Cash) lists the part numbers you need. Front loom for Fogs and PDC + you will then need somebody (TFC?) to enable the option with an autologic set-up.
Looks like with a new lightswitch and loom you / we will be able to the fogs working. Washers require some work and a pump in the waterbottle.
All in all not too much work for a lot of options. Are you picking yours up from Oxford ?
Lol - I think I said that. Will be calling you later today for the parts "To finish first, one first has to finish ...."
20th Feb 2008 9:40 am
PaulP
Member Since: 04 May 2007
Location: Barcelona
Posts: 4317
I now have front PDC retro-fitted to my euro-spec SE (thanks Nick!! )
As stated earlier....you NEED to have the rear PDC fitted for it to be a straightforward installation. If not, then it gets very complicated...
Assuming that you have rear PDC and the connectors and wiring in place for them both then it's easy.
Just buy the loom (Wiring Assy) from Nick that is valid for Front Fogs + Front PDC (# YMQ501631). Then connect everything up.
You WILL need dealer activation for the Front PDC sensors, but the fogs do not need it....obviously you need to install all the relevant bits (new switch, wiring loom as above etc, but they will work 'out of the box'.
I'm just waiting to get the PDC activated now and I'll let you know if it works.
Cheers,
Paul2006 Discovery 3 TDV6 SE AutoBuckingham Blue 2007 Golf GT DSG
Thanks - I am speaking to my tame land rover technician on Friday morning to see if they can do this the "easy" way. If not then it's TFC for some wiring as electrickery is not my thing !!
Life support machines 1 Auto Electrics 0"To finish first, one first has to finish ...."
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum