DISCO4.COM - View topic - JLR SDD and BCM issue

Advertise on DISCO4.COM

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Log In

DISCO4.COM > General (D4)

JLR SDD and BCM issue

Page 1 of 1

iffarrukh

Member Since: 08 Jul 2021
Location: Melbourne
Posts: 3

2007 Discovery 3 4.0 V6 Petrol SE Auto Siberian Silver

JLR SDD and BCM issue

Hi All

I used first time SDD v164 on my LR4 with VCM II. I can connect and read all the information. I cleared all the previous errors and no new errors coming so far.

I was hoping to use/see CCF and got the passcode for it using VIN and Seed from a website. but seems like my BCM is not responding. As per the diagram below, the configuration source is PCM and not BCM. and when I go to CCF editor, everything is grayed out.

No errors are there for BCM etc and have done some R&D as well but unable to find a answer/solution.

Any assistance would be really appreciated. and TIA

Click image to enlarge

30th Aug 2023 12:32 pm

TheWojtek

Member Since: 23 Apr 2016
Location: Poznan, Poland
Posts: 80

I'm interested, since my dad's 2006 L319 does the same. Communication error with BCM. Haven't yet got time to investigate it, but eventually I will need to edit the CCF in this car so will follow this thread. Wojtek
L319: dad's
L320: mine

30th Aug 2023 2:33 pm

John R Hickman

Member Since: 20 Jun 2023
Location: Brierley Hill
Posts: 9

To edit the ccf go to service functions and scroll down to current car configuration and run it. You will need to activate engineer mode if you want to change more than a few basic settings (there is a tick box at bottom left of editing page to show all parameters) Make sure you fully charge the battery and use a good 30 amp or more power supply.

31st Aug 2023 1:45 am

John R Hickman

Member Since: 20 Jun 2023
Location: Brierley Hill
Posts: 9

The red X means the ccf is not backed up in the BCM. When you choose initial source try IPC if available or PCM if the BCM does not update after you make any changes. Wear brown trousers because it gets a bit spooky when thing start turning on and off doors locking and warning lights beepers going off.

31st Aug 2023 2:00 am

TheWojtek

Member Since: 23 Apr 2016
Location: Poznan, Poland
Posts: 80

John R Hickman wrote:
To edit the ccf go to service functions.

The issue happens after this all is done. Of all ECUs in the car the BCM acts weird, does not react - although apparently it works. Every action involving BCM fails with "no communication", even the reinstall procedure. I guess I may have to do something with the wiring. Wojtek
L319: dad's
L320: mine

31st Aug 2023 7:36 am

Disco_Mikey

Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20732

2005 Discovery 3 TDV6 HSE Auto Cairns Blue

Are you using a genuine VCM with up to date software, or a clone device with hacked software? My D3 Build Thread

TDV8 Retrofit Build Thread

31st Aug 2023 12:18 pm

Page 1 of 1

Jump to:

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Quote Reply

DISCO4.COM is independent and not affiliated to Land Rover.